PreRide Checklist for a 2013 MV Agusta Brutale 675 Motorcycle

Shop parts for a 2013 MV Agusta Brutale 675 Motorcycle.

Introduction

A brief, focused pre-ride inspection preserves the Brutale's sharp handling and keeps you safe on the street. The PreRide Checklist for a 2013 MV Agusta Brutale 675 Motorcycle below is written specifically for this naked sport machine so you can address its idiosyncrasies quickly and confidently before every ride.

Quick 60-Second PreRide Checklist for the motorcycle listed in PreRide Checklist for a 2013 MV Agusta Brutale 675 Motorcycle

  • Check tire pressure and look for obvious cuts or foreign objects.
  • Pull both brake levers to confirm firm feel and that lights illuminate when braking.
  • Roll the bike forward and back to check chain tension and listen for tight spots.
  • Verify oil and coolant sight levels are within normal range.
  • Test throttle return, clutch action, and all electrical lights/indicators.
  • Confirm suspension shows no leaks and the sidestand retracts cleanly.
  • Adjust mirrors and secure helmet/gearthen go.

Tires and Wheels

The 2013 MV Agusta Brutale 675 is a street-focused naked sport bike with responsive, sticky rubber; tire condition is mission-critical. Start by checking PSI cold against your preferred street settings. Underinflated tires make the Brutale feel vague in corners; overinflation reduces contact patch and grip.

Patch the tread visually: inspect for uneven wear, embedded glass, or cuts in the sidewall. Spin each wheel and look for wobble or damaged rim edges. If you detect a bulge, deep puncture, or persistent vibration through the bars or pegs, address it before leaving.

Brakes

Braking performance is why you trust the Brutale in traffic and on technical roads. Squeeze the front lever and press the rear pedal to confirm firm, progressive resistancethere should be no spongy feel. With the engine off, pump the front and rear to verify firmness before starting.

Visually check brake pads at the calipers for remaining material. Look for uneven pad wear that could indicate a sticking caliper. Examine the brake fluid reservoirs for level and discoloration; dark fluid suggests service is due. Any soft lever or unusual pull requires immediate attention.

Chain & Drivetrain

The 2013 MV Agusta Brutale 675 uses a chain drive; it's lightweight and precise but needs regular attention. Measure chain slack at the midpoint of the swingarm travelaim for the range you normally run for street use, and avoid chains that are visibly tight or sagging excessively.

Rotate the rear wheel while on the stand to inspect for stiff links and to ensure even lubrication. Clean off grit with a rag if needed, then apply a moderate spray lube designed for drive chainswipe excess to avoid fling. Check sprockets for hooked teeth or uneven wear and replace as a matching set if needed.

Fluids

Fluids keep the Brutale reliable under spirited use. Glance at the engine oil sight glass or dipstick to confirm level and reasonable color. Low oil or very dark oil merits a service stop sooner than later. Confirm coolant level in the overflow reservoir; ensure the cap is secured.

Brake fluid in the master cylinders should be visible and within the marks. While you don't need to bleed routinely, note any drops in level or contaminated-looking fluid that could affect braking. Top off small amounts only with the correct fluid type you carry; larger issues need shop attention.

Controls and Lights

Controls must be immediate and predictable on a bike that responds like the Brutale. Twist the throttle and ensure it snaps back to closed without sticking. Test clutch pull for smooth, consistent engagement; adjust free play if you feel drag or slipping off the bite point.

Switch on the ignition and verify headlight low beam, high beam, front and rear turn signals, and brake light all function. Walk around and tap the brakes to confirm the brake light activates. Confirm horn operation as wellbeing heard is as important as being seen.

Suspension and General Condition

Give the front end a firm push to compress the forks and watch for oil on the fork legs. A leaking seal will leave greasy streaks; if you see any seepage, plan service. Compress the rear shock and ensure rebound is smooth without odd noises. The Brutale should settle with predictable damping rather than oscillate wildly.

Scan the frame, subframe mounts, and fasteners for looseness. Tighten any visibly loose bolts, especially around the footpegs, exhaust, and handlebars. Replace any missing hardware before hitting the road.

Final Safety Check Before Riding

  • Confirm the sidestand lifts and latches cleanly and doesn't bind when retracting.
  • Adjust mirrors for a clear rear view; take a quick visual over each shoulder before pulling out.
  • Secure straps, luggage, and any loose items that could interfere with controls or visibility.
  • Put on proper protective gear, lock the helmet, and set any personal electronics to a safe mode.

Conclusion

Consistent, targeted inspections keep your PreRide Checklist for a 2013 MV Agusta Brutale 675 Motorcycle fast and effective. Spending a few focused minutes protects the bike's performance and your safety. Make this routine habitual so every ride begins with confidence and ends with satisfaction.

Related Shopping Categories

Shop Tires for a 2013 MV Agusta Brutale 675 Motorcycle.

Shop Brakes for a 2013 MV Agusta Brutale 675 Motorcycle.

Shop Chain and Sprockets for a 2013 MV Agusta Brutale 675 Motorcycle.

Shop Oil and Fluids for a 2013 MV Agusta Brutale 675 Motorcycle.

Shop Suspension Parts for a 2013 MV Agusta Brutale 675 Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.