How to Change the Oil in a 2024 GAS GAS MC450F FACTORY EDITION

Shop parts for a 2024 GAS GAS MC450F Factory Edition Dirt Bike.

Regular oil changes are essential to keep your 2024 GAS GAS MC450F Factory Edition performing at its best. Below you'll find a comprehensive step-by-step guide proprietary to MotoSport.com, including all the tools you need, model-specific call-outs, and pro tips for a smooth, mess-free oil change experience.

Tools & Supplies Needed

  • 10mm, 13mm, and 8mm sockets (or T-handle wrenches)
  • Ratchet or T-handle
  • Oil drain pan
  • Measuring cup or graduated container (for oil amount)
  • OEM or quality replacement oil filter
  • New crush washer (recommended at every oil change)
  • Clean rags or shop towels
  • Motorex Cross Power 4T 10W/50 full synthetic oil (1.2 liters)
  • Funnel
  • Contact cleaner or degreaser (optional, for cleanup)
  • Gloves (recommended)

Key Model-Specific Call-Outs

  • The 2024 MC450F Factory Edition shares its engine layout with other late-model GAS GAS/KTM/Husqvarna 450s, meaning oil change procedures and quantities are consistent across these bikes.
  • Correct oil capacity for the MC450F Factory Edition is 1.2 liters. Always verify your bike's spec sticker or manual to confirm.
  • The oil filter and drain screen locations are easily accessible but can be blocked by the skid plate—removal is often necessary for access.
  • Always use a new crush washer on the drain bolt to prevent leaks.

Step-by-Step Oil Change Instructions

  • Warm up the engine.
    Start the motorcycle and let it idle for 2–3 minutes. This helps the oil flow out more smoothly and carries away debris.
  • Position the bike and prepare your workspace.
    Place the bike in a sturdy stand on level ground. If equipped, remove the skid plate to access the drain and screen bolts more easily.
  • Remove the oil fill cap.
    The fill cap is usually located on the right side of the engine. This step ensures oil will drain efficiently.
  • Drain the old oil.
    • Place your oil drain pan beneath the engine's drain bolt.
    • Using a 13mm socket or appropriate tool, carefully remove the drain bolt (located at the bottom of the engine).
    • Be cautious—hot oil can burn.
    • Allow the oil to drain completely before proceeding.
  • Remove and inspect the screens and drain bolt.
    Late-model GAS GAS 450s use two oil screens (strainers) to trap debris. These are accessible from the left and right sides of the engine.
    • Remove the oil screens using an 8mm or 10mm socket as required.
    • Check them for metal particles or dirt, then clean or replace if needed.
    • Inspect the drain bolt and replace the crush washer.
  • Replace the oil filter.
    • Use an appropriate wrench to remove the oil filter cover (typically 8mm or T25 bolts).
    • Pull out the old filter. Dispose of it properly.
    • Lightly coat the new filter with fresh oil—this pre-primes the filter and ensures good flow at startup.
    • Insert the new filter, then reinstall the cover and torque bolts to the manufacturer's specification (consult the owner's manual for torque specs).
  • Reinstall the screens and drain bolt.
    • Reinstall and torque the oil screens (don't overtighten).
    • Fit the drain bolt with a new crush washer and torque to spec.
  • Add new oil.
    Using a funnel, pour 1.2 liters of Motorex Cross Power 4T 10W/50 or equivalent synthetic oil into the fill port. Avoid overfilling.
  • Run the bike and check the oil level.
    Replace the oil fill cap. Start the engine and let it idle for two to three minutes, then shut off and let it sit another minute. Check the oil level using the sight glass (right side of engine); oil should be at least halfway, up to three-quarters in the window. Top off if necessary.
  • Clean up and reinstall skid plate (if removed).
    Clean any spilled oil, reinstall the skid plate and ensure there are no leaks.

Additional Tips for 2024 GAS GAS MC450F Factory Edition Owners

  • Do not reuse old oil or crush washers.
  • Double check the oil level after your first ride. Oil circulation might lower the level slightly, so top up to the recommended mark if needed.
  • Dispose of used oil and filters responsibly at a recycling center.
  • Change oil every 10–15 hours of ride time for high performance and engine longevity.

Conclusion

Sticking to this routine ensures your GAS GAS MC450F Factory Edition's engine stays healthy and performs to its full potential. For genuine parts, tools, and oil change kits specifically tailored to your bike, visit MotoSport.com.

Related Shopping Categories

Shop Motor Oil for a 2024 GAS GAS MC450F Factory Edition Dirt Bike.

Shop Oil Filters for a 2024 GAS GAS MC450F Factory Edition Dirt Bike.

Shop Oil Drain Pans for a 2024 GAS GAS MC450F Factory Edition Dirt Bike.

Shop Tools for a 2024 GAS GAS MC450F Factory Edition Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2024 GAS GAS MC450F Factory Edition Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.