How to Change the Oil in a 2024 Beta 480 RR: The Ultimate MotoSport Guide
Shop parts for a 2024 Beta 480 RR Dirt Bike!
Keeping your 2024 Beta 480 RR in peak condition means regular oil changes–a simple procedure that ensures a long, healthy engine life for this high-performance dirt bike. Follow this proprietary MotoSport.com step-by-step guide designed for your specific MMY (Make/Model/Year) to get optimal performance every ride and safeguard the reliability Beta riders expect.
What Makes the 2024 Beta 480 RR Unique?
The 2024 480 RR continues Beta’s reputation for separate engine and transmission oil sumps, meaning you need to change and refill both–each requiring 750 ml of oil. For this model year and all 2015+ RR 4-Strokes, Beta specifies Liqui Moly 10W-50 as the preferred oil. The bike uses sight glass for quick oil level checks, but accurate measurement with a graduated container is best for refilling. Be aware: engineers recommend verifying the oil level after running the engine for two minutes, ensuring oil is distributed and readings are accurate. Also, always use new O-rings during reassembly to prevent future leaks and safeguard your investment.†
What You’ll Need
- Two drain pans
- 13 mm socket for drain bolts
- 8 mm socket for oil filter cover bolts
- Replacement oil filter
- New O-rings for filter cover & both drain bolts
- Liqui Moly 10W-50 oil (2 x 750 ml)
- Torque wrench
- Funnel and clean rags
Oil Change Steps for Your 2024 Beta 480 RR
- Remove the skid plate to access drain and filter areas, if equipped.
- Place drain pans beneath the engine and transmission.
- Using an 8 mm socket, remove both oil filter cover bolts, tilting the cover to drain old oil into the pan.
- Take out the old oil filter; leave the cover off for better drainage.
- Remove the engine drain bolt using a 13 mm socket. Let oil completely drain.
- Now remove the transmission drain bolt. Wait until all oil has flowed out.
- Replace all O-rings for the oil filter cover and both drain bolts with new ones to prevent leaks.
- Reinstall drain bolts:
– Engine drain bolt: tighten to 15 Nm
– Transmission drain bolt: tighten to 20 Nm - Install a new oil filter, ensuring the open end faces the engine and the solid end the filter cover. Install the cover and torque to 10 Nm.
- Add 750 ml of oil to the transmission and another 750 ml of oil to the engine. Replace filler cap O-rings if provided.
- Start your engine and let it run for two minutes.
- With the bike upright, check the oil level in the sight glass–aim for the level to be at the midpoint of the red zone. Adjust as needed. Don’t overfill, as excess oil may cause pressure and leaks.
Pro Tips Specific to the 2024 Beta 480 RR
- This model features separate engine & transmission oil circuits. Always change both.
- The correct oil level may fluctuate after running the bike. Confirm the sight glass after warming up for the most accurate reading.
- Underfilling or overfilling by even 100 ml can affect performance–use a measuring container for accuracy.
- Replace filter and all O-rings at every change for maximum protection.
- If the oil appears milky, change it immediately–this may indicate coolant contamination.
Ride On, with Confidence
Follow this MotoSport.com guide every 10-15 hours of engine time or after any muddy or waterlogged ride. Doing this will keep your 2024 Beta 480 RR roaring and reliable, no matter how hard you push it. For premium filters, oil, O-rings, and more, MotoSport has your bike covered.
† Always refer to your owner’s manual for any updates or changes specific to your serial number or production batch.
Related Shopping Categories
Shop Motor Oil for a 2024 Beta 480 RR Dirt Bike!
Shop Oil Filters for a 2024 Beta 480 RR Dirt Bike!
Shop Oil Drain Pans for a 2024 Beta 480 RR Dirt Bike!
Shop Tools for a 2024 Beta 480 RR Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2024 Beta 480 RR Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.