How to Change the Oil in a 2022 Honda CRF300L: Step–By–Step Guide
Shop parts for a 2022 Honda CRF300L Dirt Bike.
Performing regular oil changes on your 2022 Honda CRF300L is crucial to maintaining peak engine performance and longevity. This step-by-step guide is proprietary to MotoSport.com and covers everything CRF300L owners need to know for a safe and clean oil change, including model-specific notes.
Tools & Supplies You Will Need
- Torque wrench (able to measure up to 24 N·m/18 lbf·ft)
- 8mm, 12mm socket wrenches
- 4mm Allen wrench (for some skid plates – your setup may vary)
- Engine oil drain pan
- Rubber gloves
- Safety glasses
- Rags or shop towels
- New oil filter (recommended: OEM parts for best fit)
- New sealing washer (crush washer for drain bolt)
- New oil filter cover gasket
- Funnel
- Measuring cup (if needed)
- Contact cleaner (optional for cleaning parts)
- Recommended engine oil (see manual; generally 10W‑30 or 10W‑40 motorcycle oil)
Honda CRF300L-Specific Call-Outs
- Oil Capacity: 1.5 liters (1.6 US quarts) if changing both oil and filter, 1.4 liters (1.5 US quarts) if changing oil only. Note that overfilling or underfilling can harm the engine. Use the oil level inspection window while the bike is upright to check the fill.
Source: Honda service info - Oil Filter Orientation: The “OUT-SIDE” mark (or rubber seal) must face out. Installing the filter backward may cause engine failure. If the OUT-SIDE mark is missing, ensure the rubber seal faces inward, with the open hole toward the engine block.
Source: Road and Trail - Torque Specs: The oil drain bolt should be tightened to 20–24 N·m (18 lbf·ft). Oil filter cover bolts torque: 9 N·m.
Source: Road and Trail, YouTube - First Oil Change: After the initial 600 miles, then every 8,000 miles.
Source: YouTube
Step-by-Step Instructions
- Warm up the engine for 2–3 minutes. Warming the oil allows it to drain more completely.
- Shut off the engine and position the bike securely on a flat surface or center stand.
- Remove the skid plate (if equipped), using a 4mm Allen or appropriate tool.
- Unscrew and remove the oil filler cap to allow faster draining.
- Place the drain pan under the engine’s drain bolt.
-
Remove the engine oil drain bolt and sealing washer. Allow oil to fully drain. Inspect the old washer; always use a new one for reassembly.
Tip: Use shop rags or gloves—hot oil may splash. - Install the new sealing washer onto the drain bolt, apply a small amount of fresh engine oil to the threads and seat, and reinstall the bolt. Tighten to the specified torque (20–24 N·m or 18 lbf·ft).
- Remove the oil filter cover bolts (there are four) and carefully remove the oil filter cover with its spring and gasket.
- Remove and discard the used oil filter.
- Install the new oil filter:
- The side labeled “OUT-SIDE” faces out. If not labeled, the rubber seal and hole should face into the engine block.
- Insert the oil filter spring into the oil filter cover.
- Check/replace the filter cover gasket. Lightly lubricate the new gasket with engine oil, then install the cover.
- Tighten the cover bolts evenly in a crisscross pattern to 9 N·m.
- Pour in fresh engine oil:
- Use a clean funnel to avoid contamination.
- Pour in 1.5 liters (1.6 US quarts) for oil and filter change.
-
With the bike upright (not on the side stand), check the oil level using the inspection window on the right side. The oil should be at the top mark, not above. Top up if needed.
Tip: After filling, install the filler cap, start the engine, and run for 30 seconds. Turn off and let settle a few minutes. Check and top off the oil if the level has dropped. - Inspect the drain bolt and filter area for leaks.
- Reinstall the skid plate if removed. Dispose of old oil and filter properly.
Extra Tips for 2022 Honda CRF300L Owners
- Always use motorcycle-specific oil compatible with wet clutch systems.
- Avoid overtightening bolts, especially aluminum parts susceptible to stripping.
- If unsure about orientation or torque, consult your Honda owner’s manual or an authorized Honda dealer.
- Never run the engine with low or dirty oil – immediate wear and possible engine damage may occur.
Disclaimer
This proprietary MotoSport.com guide is tailored for the 2022 Honda CRF300L and is not a substitute for your official Honda owner’s or service manual. Always prioritize safety and consult with a certified mechanic if unsure about any procedure.
Related Shopping Categories
Shop Motor Oil for a 2022 Honda CRF300L Dirt Bike.
Shop Oil Filters for a 2022 Honda CRF300L Dirt Bike.
Shop Oil Drain Pans for a 2022 Honda CRF300L Dirt Bike.
Shop Tools for a 2022 Honda CRF300L Dirt Bike.
Shop Oil Fillers and Drain Plugs for a 2022 Honda CRF300L Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.