How to Change the Oil in a 2019 Sherco 500 SEF-R: Step-by-Step Guide
Shop parts for a 2019 Sherco 500 SEF-R Dirt Bike.
Keeping your 2019 Sherco 500 SEF-R in top shape means following a consistent oil change schedule. This dirt bike demands precise maintenance, and an oil change is a job any dedicated owner can tackle at home. Read on for a proprietary step-by-step guide from MotoSport.com, including required tools, precise steps, recommended oil, and crucial call-outs unique to this bike.
Tools and Supplies Needed
- Synthetic 4-stroke engine oil (SAE 10W-60, capacity: 0.9L)
- New oil filter
- Oil drain pan
- 8mm socket
- 17mm socket
- 4mm Allen wrench
- Torque wrench (capable of 15Nm and 22Nm settings)
- Replacement crush washers/gaskets
- New O-ring (for oil filter cap)
- Gloves and rags (to keep things tidy)
Changing the Oil: Step-By-Step Instructions
- Warm up the engine. Start your Sherco and let it idle for a few minutes. Warm oil thins out, making it easier to fully drain and carry away contaminants.
- Secure your workspace and tools. Place the bike on a stand or level surface. Arrange your tools and oil drain pan beneath the engine to catch all used oil.
-
Remove the oil drain plugs and pre-filter.
- Use the 17mm socket to remove drain plug 1 (M19, torque spec: 22Nm).
- Remove the magnetic drain plug (M12, torque spec: 15Nm).
- Take off the pre-filter with the 8mm socket if present.
- Allow the oil to drain completely—be patient to get every drop out for proper engine care.
-
Remove the oil filter and cap.
- Find and remove the oil filter cap (use the 4mm Allen wrench).
- Take out the used oil filter and discard it. Always replace the oil filter with a new one at every oil change.
- Inspect and replace the O-ring on the oil filter cap if necessary.
-
Clean and inspect drain plugs and filters.
- Wipe metal shavings from the magnetic drain plug.
- Check pre-filter mesh for debris and clean or replace as needed.
- Install new crush washers or gaskets on all plugs.
-
Reinstall the drain plugs, pre-filter, and oil filter.
- Fit the pre-filter and secure it.
- Reinstall drain plug 1 (M19, 22Nm), the magnetic drain plug (M12, 15Nm), and the oil filter cap (M45, 15Nm) with a new O-ring.
- Tighten everything with a torque wrench to factory specifications to prevent leaks and stripping.
-
Add new oil.
- Remove the engine oil filler cap.
- Pour in 0.9 liters of fully synthetic 10W-60 oil as recommended for your Sherco 500.
-
Check the oil level and run the engine.
- Replace the filler cap.
- Start the engine and let it idle for about 30 seconds, then shut it off. Wait one minute for oil to settle.
- Check the oil level in the sight gauge. Top up if needed.
- Inspect for leaks at all plugs and the oil filter area.
-
Cleanup.
- Wipe up any spilled oil and dispose of the used oil, old oil filter, and rags responsibly—never pour oil down the drain or onto the ground.
2019 Sherco 500 SEF-R Specific Call-Outs
- Oil Capacity: The engine holds 0.9 liters of oil. Do not overfill, as excess oil can lead to engine issues.
- Recommended Oil: Always use a fully synthetic 10W-60 oil for optimal performance under extreme operating conditions.
- Drain Plug Torque: Use a torque wrench to properly seat both drain plugs and the oil filter cap (see torque values above) to avoid leaks and stripped threads.
- Replace the Oil Filter and O-ring: This bike’s high-revving engine demands a fresh oil filter (and new O-ring) at every oil change.
- Environmental Responsibility: Dispose of all oil and related materials at a proper collection facility—this is both good stewardship and in keeping with MotoSport.com’s environmental values.
Expert Oil Change Tips for Your 2019 Sherco 500 SEF-R
- Change oil more frequently if you race, ride aggressively, or operate in extreme conditions to protect your investment.
- Inspect the magnetic drain plug after every change for excessive metal debris indicating abnormal engine wear.
- If in doubt, consult your owner’s manual for diagrams and official specs.
Consistent oil changes are one of the most important things you can do to keep your 2019 Sherco 500 SEF-R running reliably and performing at its best.
This how-to guide is proprietary to MotoSport.com.
Related Shopping Categories
Shop Motor Oil for a 2019 Sherco 500 SEF-R Dirt Bike.
Shop Oil Filters for a 2019 Sherco 500 SEF-R Dirt Bike.
Shop Oil Drain Pans for a 2019 Sherco 500 SEF-R Dirt Bike.
Shop Tools for a 2019 Sherco 500 SEF-R Dirt Bike.
Shop Oil Fillers and Drain Plugs for a 2019 Sherco 500 SEF-R Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.