How to Change the Oil in a 2019 Beta 250 RR Race

Shop parts for a 2019 Beta 250 RR Race Dirt Bike!

Changing the oil on your 2019 Beta 250 RR Race is a straightforward but vital maintenance task to keep your bike running strong on the trail or track. Below, you will find MotoSport's proprietary step-by-step guidetailored for the 250 RR Race two-stroke modelalong with need-to-know details for owners of this specific dirt bike.

Essential Tools & Supplies

  • Fresh transmission/gear oil (800 cc recommended for the 250 RR Race)
  • Drain pan
  • 13 mm socket or T-handle wrench
  • Clean rag
  • Contact cleaner
  • Funnel
  • Replacement O-ring (inspect for necessity)
    • >
  • Gloves

Step-by-Step Oil Change Instructions

  1. Warm up your engine
    Start and run the bike for a few minutes so the oil flows easily. Do not let it get hotjust warm to the touch.
  2. Position your bike
    Stand the 250 RR Race upright and level, using a center stand or bike lift if possible.
  3. Remove the drain plug
    Put on gloves. Place your drain pan beneath the transmission case. Locate the oil drain bolt (usually on the bottom left side) and use a 13 mm socket or T-handle to loosen and remove it.
    Let the oil flow out completelythis may take several minutes.
  4. Loosen the filler cap
    This allows oil to drain more quickly. Set the cap aside in a clean spot.
  5. Inspect and clean the drain plug
    The plug is magnetic, so check for metallic debris. Light residue is typical, but heavy flakes may indicate internal wear. Clean thoroughly with a rag and contact cleaner. Examine the O-ring for cracks or flatteningreplace it if necessary.
  6. Install the drain plug
    Once oil is drained, reinstall the plug with its cleaned or new O-ring. Tighten until snug, but do not overtightenconsult your owner's manual for torque specs if available.
  7. Refill with new oil
    Use a funnel at the fill opening. Pour in 800 cc (0.8 liters) of fresh transmission oil for a standard change. Let the oil settle for a minute after pouring to ensure accurate measurement. Wipe off any spills.
  8. Reinstall the filler cap
    Tighten the cap securely and clean the area.
  9. Check oil level
    Some models have a check bolt to confirm the level; with the bike upright, remove the boltoil should seep out slightly if full. If not, add a small amount before replacing the check bolt and re-torqueing it. Wipe down the bottom of the engine to prevent grime buildup.
  10. Dispose of old oil properly
    Take the used oil to a recycling facility. Never pour it outdoors or down drains.
  11. Log your maintenance
    Record the date and hours run in your maintenance journalBeta recommends oil changes every 8-10 riding hours or after harsh conditions.

What 2019 Beta 250 RR Race Owners Should Know

  • Transmission-specific oil: This model is a two-stroke and uses oil only for the transmission, not engine combustion. Always use oil formulated for gearboxes, not standard engine oil.
  • Magnetic drain plug: Unique to these bikes, it picks up ferrous debris–helping you catch early signs of internal wear.
  • O-ring sealing: Some versions use an O-ring (not a crush washer) for the drain boltinspect and replace as needed to avoid leaks.
  • Quick routine: With regular changes, the oil remains clean, aiding shifting smoothness and transmission longevity. Owners often report the Beta's gearbox oil emerging cleaner than some rivals; this is a sign of effective design and careful riding.

Final Tips

  • Never overfill; excess oil can affect shifting feel and cause leaks.
  • Keep your bike level for an accurate fill and check.
  • If you ride in sand, mud, or race frequently, reduce the interval between oil changes for maximum lifespan.

Related Shopping Categories

Shop Motor Oil for a 2019 Beta 250 RR Race Dirt Bike!

Shop Oil Filters for a 2019 Beta 250 RR Race Dirt Bike!

Shop Oil Drain Pans for a 2019 Beta 250 RR Race Dirt Bike!

Shop Tools for a 2019 Beta 250 RR Race Dirt Bike!

Shop Oil Fillers and Drain Plugs for a 2019 Beta 250 RR Race Dirt Bike!

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.