How to Change the Oil in a 2018 Beta 300 RR: MotoSport Exclusive Guide
Shop Parts for a 2018 Beta 300 RR Dirt Bike!
Regular oil changes are crucial for keeping your 2018 Beta 300 RR running at its best. This two-stroke dirt bike uses transmission oil since premix fuel takes care of the engine's lubrication. If it's your first time or you need a model-specific guide, follow these expert tips and tricks to keep your Beta ready for the next trail ride.
What You'll Need
- Correct weight transmission oil (Beta recommends 10W-40 or as specified in your owner's manual)
- Oil catch pan
- 8mm socket or T-handle
- Flathead screwdriver (if removing the skid plate)
- Clean rags
- Optional: SE1 cleaner or similar for cleaning debris
Step-by-Step Oil Change for the 2018 Beta 300 RR
-
Warm Up the Engine
Start your bike and let it idle for 2-3 minutes. This warms the oil, allowing it to drain completely and bring contaminants to suspension. -
Remove the Skid Plate (Optional but Recommended)
Use an 8mm driver to remove the bolts securing your skid plate. Taking off the skid plate makes oil draining and cleaning easier, especially after muddy rides. Clean underneath with a rag or contact cleaner to prevent buildup. -
Place Bike Upright and Ready the Catch Pan
Set the bike uprightlevel is important for accurate oil draining and filling. Slide the oil pan beneath the transmission drain bolt. -
Remove the Drain Bolt
Locate the transmission drain bolt at the bottom side of the engine. Loosen and remove it using your socket. Allow all oil to drain completelyexpect some debris, as Beta's magnetized drain bolt catches metallic particles. -
Inspect and Clean
Wipe off any grime or metal particles from the drain bolt. Inspect the O-ring and replace if there's visible wear or damage. -
Reinstall the Drain Bolt
Once the oil has drained completely, reinstall the bolt and torque to manufacturer spec (typically 10 Nm or 7.5 ft-lbs). -
Refill with Fresh Transmission Oil
Remove the oil fill cap. Pour in 800cc (milliliters) of specified oil for a standard changeavoid overfilling. If you performed a full engine overhaul, use 850cc. Let oil settle before checking level. -
Check Oil Level
Beta recommends the correct oil level is just at the bottom of the check bolt threads. With the bike upright, remove the check bolt; oil should just reach the bottom. If needed, add or drain oil until proper level is met. -
Reinstall Skid Plate
Bolt the skid plate back in place. Clean any excess oil from the engine area to prevent dirt sticking on your next ride.
Model-Specific Tips for the 2018 Beta 300 RR
- Transmission oil lubricates the clutch and gearboxusing the correct quantity and weight is critical for shift feel and clutch longevity.
- Beta's magnetic drain plug helps capture metallic debris. Always check for buildupexcess metal shavings could indicate abnormal wear.
- Oil capacity differs for engine overhauls vs. routine changes: for a routine change, use 800cc; after a full overhaul or deep clean, fill to 850cc.
- There is no oil filter to replace on this 2-stroke model—just a simple drain and refill process.
- Warming and leveling the bike before draining & checking oil ensures you get an accurate fill and best performance.
Final Notes
Always dispose of used oil responsibly and check your Beta's oil level periodically between changes, especially after wet or muddy rides. A routine transmission oil change will keep your 2018 Beta 300 RR riding strong on every adventure.
Related Shopping Categories
Shop Motor Oil for a 2018 Beta 300 RR Dirt Bike!
Shop Oil Filters for a 2018 Beta 300 RR Dirt Bike!
Shop Oil Drain Pans for a 2018 Beta 300 RR Dirt Bike!
Shop Tools for a 2018 Beta 300 RR Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2018 Beta 300 RR Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.