How to Change the Oil in a 2018 Beta 250 RR Race
Shop parts for a 2018 Beta 250 RR Race Dirt Bike!
The 2018 Beta 250 RR Race stands out among 2-stroke dirt bikes for its competitive race-caliber features – but to keep your engine and gearbox running strong, regular oil changes are critical. Below is a proprietary MotoSport guide tailored specifically for owners of this model, ensuring you get the job done efficiently and correctly each time.
What Makes the 2018 Beta 250 RR Race Unique?
- 2-stroke engine design with separate transmission/gearbox oil system.
- O-ring drain plug – not all models use a crush washer, so be sure to check the O-ring for wear during each oil change.
- Magnetic drain plug that traps metal shavings, a vital diagnostic tool for early detection of internal wear.
What You–ll Need
- Approved gearbox/transmission oil (consult your owner's manual for spec – typically JASO MA standard).
- Oil drain pan
- 13 mm socket or T-handle wrench
- Funnel
- Shop rags
- Contact cleaner (for cleaning parts and spilled oil)
- Torque wrench (recommended for reinstalling drain bolt)
- Maintenance journal (to record intervals – typically every 8 to 10 hours of use for hard riding)
Step-by-Step Oil Change Guide
- Warm up the engine for 2–3 minutes for optimal oil flow.
- Place the bike upright (using a stand if available).
- Position the drain pan under the gearbox drain bolt located at the bottom of the engine case.
-
Use the 13 mm socket or T-handle to loosen the drain bolt.
Tip: Use gloves – the oil may be hot. -
While the oil drains, unscrew the oil filler cap to improve flow.
Leave the cap resting lightly in place to avoid contamination. -
Inspect and clean the magnetic drain plug:
Remove any metal debris collected and check the O-ring for cracks or flattening. Replace if needed. - When the oil flow stops, wipe the area clean. Reinstall the drain plug (with cleaned O-ring) and tighten to manufacturer specification.
-
Using a funnel, add fresh gearbox oil through the filler.
Recommended amount: 800 cc (0.8 liters) for routine changes.
Pour slowly to avoid air pockets. - Reinstall the oil filler cap. Clean any spilled oil with contact cleaner and a rag.
- Some models have a level check bolt – open this briefly to verify the correct oil level (oil should just dribble from the hole with the bike upright).
- Ride briefly, then double-check for leaks and re-check the oil level.
- Record the date and hours in your maintenance log.
Additional Tips for the 2018 Beta 250 RR Race Owner
- Always use the specified amount and type of oil – under or over-filling can affect shifting and clutch performance.
- Frequent oil changes after muddy or wet rides help maximize longevity, especially for a race-tuned engine.
- Check your O-ring regularly; a failed O-ring on the drain plug is a known issue in some Beta models and may cause leaks.
Performing regular oil changes will keep your Beta 250 RR Race running smoothly and help prevent costly repairs—whether you're chasing podiums or blasting through the trails, proper maintenance is key.
Related Shopping Categories
Shop Motor Oil for a 2018 Beta 250 RR Race Dirt Bike!
Shop Oil Filters for a 2018 Beta 250 RR Race Dirt Bike!
Shop Oil Drain Pans for a 2018 Beta 250 RR Race Dirt Bike!
Shop Tools for a 2018 Beta 250 RR Race Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2018 Beta 250 RR Race Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.