How to Change the Oil in a 2017 Beta 350 RR: Pro Guide for MotoSport Riders
Shop parts for a 2017 Beta 350 RR Dirt Bike!
Changing the engine oil on your 2017 Beta 350 RR keeps your Italian thumper at peak performance and extends its longevity. Follow this step-by-step guide, tailored for owners who want to maintain their Beta's legendary reliability.
What Makes the 2017 Beta 350 RR Oil Change Unique?
- The 2017 Beta 350 RR runs a split engine and gearbox oil system–ensure you change the correct oil depending on which side you are servicing.
- Oil quantity is specific: Beta recommends about 750 ml for the engine side, but during an oil change you may drain closer to 650 ml, which is normal. Always check the sight glass after filling and running the engine for accuracy.
- Oil filter inspection and replacement is essential during the change for this model, as contaminants can quickly affect performance.
Tools & Supplies Needed:
- Engine oil (see manual for Beta's recommended type and grade)
- Oil filter (paper style, check compatibility for 2017 350 RR)
- Basic socket or wrench set
- Drain pan
- Rags or shop towels
- Gloves (for hot oil safety)
Step-By-Step Oil Change
- Warm up the engine for 2 to 3 minutes for optimal oil flow.
- Stabilize the bike: Place your Beta on a flat surface and use a stand to keep it upright.
- Remove the engine guard/skid plate if equipped; this gives easy access to the oil drain plug and makes cleanup easier.
- Place a drain pan beneath the engine.
- Unscrew the oil filler cap to allow air in (for smooth draining), then remove the engine oil drain plug (typically 20Nm torque on install) and let the oil fully drain. Be careful–hot oil can burn skin.
-
Remove and inspect/replace the oil filter:
- Use seeger ring pliers to extract the paper element.
- Lubricate the new filter (if replacing) and insert.
- Inspect the drained oil for metallic debris or milky consistency, indicating wear or contamination. Investigate if abnormal.
- Clean and reinstall the drain plug, torquing to specification.
- Fill with fresh oil: Pour ~750 ml into the filler port, but be prepared you may only drain 650 ml. Go by the sight glass level: After filling, run the engine for a couple minutes, let it settle, and check the oil window–it should be midway to the upper edge of the marked circle.
- Re-install filler cap and skid plate.
- Double-check for leaks.
- Dispose of used oil and filter responsibly.
Best Practices & Critical Tips for 2017 Beta 350 RR Owners
- Beta recommends oil changes every 20 hours of engine time, but aggressive riding or racing calls for more frequent service.
- Don't overfill–too much oil leads to foaming or power loss.
- The oil level window can read higher or lower depending on engine temp; always check level after running and letting the engine sit a few minutes.
- Always use the oil weight and spec recommended by Beta for your climate–a mismatch can cause clutch or engine damage.
- If the drained oil is far less than expected, check for leaks or internal consumption.
Stay ahead of breakdowns and boost your Beta's performance by keeping up with oil changes using OEM and premium parts from MotoSport's extensive catalog for the 2017 350 RR!
Related Shopping Categories
Shop Motor Oil for a 2017 Beta 350 RR Dirt Bike!
Shop Oil Filters for a 2017 Beta 350 RR Dirt Bike!
Shop Oil Drain Pans for a 2017 Beta 350 RR Dirt Bike!
Shop Tools for a 2017 Beta 350 RR Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2017 Beta 350 RR Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.