How to Change the Oil in a 2012 Can-Am DS90

Maintaining your 2012 Can-Am DS90 is crucial for ensuring its longevity and performance. One of the most important maintenance tasks is changing the oil. Regular oil changes keep your engine running smoothly and efficiently. Follow this guide to change the oil in your DS90 and keep it in top condition.

Shop parts for a 2012 Can-Am DS90 ATV.

Tools and Materials Needed

  • Oil filter wrench
  • Socket wrench set
  • Drain pan
  • Funnel
  • New oil filter
  • Engine oil (check your owner's manual for the correct type and amount)
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure all the old oil drains out completely.

2. Locate the Drain Plug

The drain plug is located at the bottom of the engine. Place the drain pan underneath to catch the old oil.

3. Drain the Old Oil

Use a socket wrench to remove the drain plug. Allow the oil to completely drain into the pan. Once drained, replace the drain plug and tighten it securely.

4. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. Install the new filter by hand, ensuring it is snug but not overtightened.

5. Add New Oil

Remove the oil fill cap and use a funnel to add the new oil. Refer to your owner's manual for the correct oil type and capacity. After adding oil, replace the fill cap.

6. Check Oil Level

Start the engine and let it run for a few minutes. Turn it off and wait a few minutes for the oil to settle. Use the dipstick to check the oil level and add more if necessary.

Important Notes for Can-Am DS90 Owners

The 2012 Can-Am DS90 is a reliable ATV, but regular maintenance is key. Always use the recommended oil type & filter to ensure optimal performance. Additionally, check for any leaks after changing the oil and address them immediately to prevent engine damage.

By following these steps, you can ensure your 2012 Can-Am DS90 remains in excellent condition, providing you with many more adventures on the trails.

Related Shopping Categories

Shop Motor Oil for a 2012 Can-Am DS90 ATV.

Shop Oil Filters for a 2012 Can-Am DS90 ATV.

Shop Oil Drain Pans for a 2012 Can-Am DS90 ATV.

Shop Tools for a 2012 Can-Am DS90 ATV.

Shop Oil Fillers and Drain Plugs for a 2012 Can-Am DS90 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.