How to Change the Oil in a 2011 Beta 520 RS SM

Shop parts for a 2011 Beta 520 RS SM Dirt Bike!

Regular oil changes are essential to keep your 2011 Beta 520 RS SM running at its best. This exclusive MotoSport guide walks you through each step with tips unique to your bike–ensuring performance, longevity, and reliability whether you're hitting singletrack or commuting on pavement.

What You–ll Need

  • High-quality engine oil (consult manual for type/capacity)
  • New oil filter
  • Replacement drain plug washers (optional but recommended)
  • Correct size sockets/wrenches
  • Oil catch pan
  • Clean rags and gloves
  • Torque wrench

Preparation

  • Warm up the engine for a few minutes to thin the oil–this helps it drain fully.
  • Turn off the bike, place it on a stable stand, and let it cool slightly.

Oil Draining Procedure

  • Locate the engine oil drain plug and transmission oil drain plug underneath the engine case. The 2011 520 RS SM uses separate oils for engine and transmission, so both need changing during each service.
  • Position the oil pan below the drain plugs.
  • Remove both drain plugs and let oil completely drain. Inspect and clean the drain plug magnets for metal debris.
  • Replace the crush washers if worn, and reinstall the drain plugs–torque the engine oil drain plug to 15 Nm, and the transmission drain plug to 20 Nm for a proper seal.

Changing the Oil Filter

  • Remove the oil filter cover with the appropriate tool.
  • Take out the old filter. Lightly oil the rubber seal on your new filter to prevent pinching and ensure a proper fit.
  • Insert the new filter, making sure it's seated correctly. Reinstall the clean oil filter cover and tighten bolts evenly by hand before snugging them with a torque wrench.

Refilling With Oil

  • Remove the oil fill cap.
  • Pour in the correct quantity of fresh engine oil–check your owner's manual for exact capacity.
  • Replace the fill cap. Start the engine and let it idle for a minute, then shut it off to settle the oil.
  • Check the oil level using the sight glass or dipstick, add oil if needed. Do not overfill.

After the Oil Change

  • Inspect for leaks at drain plugs and oil filter cover.
  • Dispose of old oil and filter responsibly.
  • Log your maintenance for future reference.

Model-Specific Notes

  • The Beta 520 RS SM’s high-performance four-stroke engine benefits from frequent oil changes, especially in trail or supermoto use. Adhering to a strict service interval keeps your gearbox and clutch performing smoothly because the engine and transmission use separate oil circuits.
  • If you ride aggressively or in harsh terrain, consider inspecting all major fastenings and chassis connections after the first few hours of use–Beta recommends this practice to prevent wear and maintain safety. Key areas include the shock absorber bolts, swingarm, and wheel hubs.
  • For any components showing excessive metal fragments in the oil, deeper inspection may be warranted.

Changing your own oil is one of the most effective ways to prolong the life of your 2011 Beta 520 RS SM. Ride with confidence knowing your machine is protected by clean, fresh oil & the right MotoSport parts!

Related Shopping Categories

Shop Motor Oil for a 2011 Beta 520 RS SM Dirt Bike!

Shop Oil Filters for a 2011 Beta 520 RS SM Dirt Bike!

Shop Oil Drain Pans for a 2011 Beta 520 RS SM Dirt Bike!

Shop Tools for a 2011 Beta 520 RS SM Dirt Bike!

Shop Oil Fillers and Drain Plugs for a 2011 Beta 520 RS SM Dirt Bike!

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.