How to Change the Oil in a 2010 Husaberg FE450

Shop parts for a 2010 Husaberg FE450 Dirt Bike.

Changing the engine oil in your 2010 Husaberg FE450 is one of the most crucial maintenance tasks you can do to ensure optimal performance and longevity of your dirt bike. This comprehensive guide is proprietary to MotoSport.com and will walk you through every step, listing the necessary tools, calling out model-specific details, and providing expert tips to make your oil change smooth, clean, and efficient.

Tools and Materials Needed

  • Engine oil (consult your owner's manual for recommended type and viscosity)
  • New oil filter
  • Replacement oil screen (recommended, not always required)
  • Drain pan
  • Ratchet and socket set (including a 13mm socket for drain plug)
  • Torque wrench (capable of 20 Nm)
  • Rubber gloves
  • Funnel
  • Shop towels or rags
  • New seal/washer for drain plug
  • Contact cleaner (optional, for cleaning up any spills)

Preparation

  • Warm up your engine for a few minutes to bring the oil to operating temperature. This helps the oil to flow more easily and carry out more contaminants.
  • Find a flat, stable area and place your bike on a suitable stand. Ensure the motorcycle is level to allow complete drainage.

Step-by-Step Oil Change Instructions

  1. Remove the skid plate (if equipped; optional but helpful for access).
  2. Locate the oil drain plug on the underside of the engine case. Place your drain pan underneath.
  3. Remove the drain plug using your socket set. Be careful—the oil will be hot. Let the old oil completely drain out (this may take several minutes).
  4. Clean the drain plug thoroughly. The plug is magnetic, so remove any metal shavings. Always replace the seal ring with a new one to prevent leaks.
  5. Remove and clean (or replace) the oil screen. For the 2010 Husaberg FE450, the oil screen is located in the plug with the hexagon drive next to the oil drain plug on the right side of the engine. Remove it and either clean thoroughly or install a new screen as recommended.
    Specific call-out for this model: Always inspect and clean or replace the oil screen and the oil filter with each oil change. This bike is known for its sensitive lubrication system, and debris can cause significant engine damage if not removed regularly.
  6. Reinstall the oil screen and the drain plug with a new seal ring. Tighten the drain plug to 20 Nm using a torque wrench. Do not overtighten, as this can strip threads or distort the copper washer.
  7. Remove the oil filter cover (usually held by bolts on the right side of the engine). Take out the old oil filter and install the new one. Prime the new filter by dipping it in fresh oil before installation–this is a common practice for Husaberg, KTM, and Husqvarna models to prevent dry starts.
  8. Install the oil filter cover and tighten the bolts evenly to manufacturer's specifications.
  9. Pour in new oil via the oil fill cap on top of the engine. Recommended capacity is 1,200 ml (1.2 liters) for this model, but always verify your service manual for the exact amount and avoid overfilling.
  10. Replace the oil fill cap.
  11. Start the engine and let it idle for 2–3 minutes. Then shut it off and let it sit for a minute. Check the oil level in the sight glass–the oil should be at least halfway up, ideally three-quarters toward the top of the window.
  12. Check for leaks around the drain plug, oil screen, and oil filter cover. Address any that you find immediately.
  13. Reinstall the skid plate (if equipped).

Important Model-Specific Tips for the 2010 Husaberg FE450

  • Oil change interval: For high-performance models like the FE450, change the oil every 10–15 hours of riding or after every major race for optimal engine health.
  • Always use high-quality, motorcycle-specific 4-stroke oil–do not use standard automotive oils.
  • Do not reuse the drain plug washer. Always replace it to ensure a tight, leak-free seal.
  • Double-check the oil level after the first ride–oil can settle in the system after initial fill and leave the level low.
  • Dispose of old oil and filter responsibly. Most local auto parts stores accept used oil.

Conclusion

Taking the time to change your oil correctly on your 2010 Husaberg FE450 can dramatically increase the lifespan of your dirt bike and ensure high performance. Always follow manufacturer torque specs, keep things clean, and stay on top of routine maintenance. For OEM and high-performance replacement oil, filters, and all your dirt bike needs, count on MotoSport.com as your go-to resource.

Related Shopping Categories

Shop Motor Oil for a 2010 Husaberg FE450 Dirt Bike.

Shop Oil Filters for a 2010 Husaberg FE450 Dirt Bike.

Shop Oil Drain Pans for a 2010 Husaberg FE450 Dirt Bike.

Shop Tools for a 2010 Husaberg FE450 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2010 Husaberg FE450 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.