How to Change the Oil in a 2007 Husqvarna TE510

Shop parts for a 2007 Husqvarna TE510 Dirt Bike.

If you own a 2007 Husqvarna TE510, routine oil changes are essential for maximizing engine longevity and maintaining optimal performance. This step-by-step guide, proprietary to MotoSport.com, will walk you through the process, outline the tools required, and highlight model-specific tips to make your oil change seamless.

Tools and Supplies Needed

  • Socket wrench set (metric, for drain bolts and filter covers)
  • Drain pan
  • Funnel
  • Clean rags
  • Replacement engine oil (recommended: 10W-50 full synthetic motorcycle oil, such as Castrol Power 1 Racing 10W-50, 4-stroke)
  • Replacement oil filter (HiFlo model for 2007 TE510)
  • Replacement oil filter cover o-ring/gasket (if necessary)
  • Gloves (optional, but recommended for cleanliness and protection)
  • Torque wrench (for correct bolt tightening)
  • Screwdriver or pick (for removing/seating filters)
  • Service manual or workshop sheet (recommended for first-timers or if unsure of bolt torque specs)

Preparation Steps

  • Allow the bike to cool completely before starting.
  • Set the bike on a stable stand or use a pulley system to slightly angle the bike for optimal oil drainage (a tip specific to this model, as it helps oil fully evacuate the crankcase).
  • Gather all tools and parts and place a drain pan under the bike.

Step-by-Step Instructions

  1. Remove the Drain Bolts
    The 2007 TE510 uses multiple drain bolts. Locate the main drain plug at the bottom of the engine.
    • Place your drain pan under the plug.
    • Loosen and remove the plug with the socket wrench. Allow the oil to fully drain.
    • This model may have a second drain plug or inspection bolt for additional drainage. Remove this as well if present.
  2. Remove and Clean the Oil Screens
    The TE510 includes a stainless steel mesh filter (“oil screen”) near the left side of the engine, just in front of the gear shifter.
    • Gently remove the screen (it may slide out or may need to be unscrewed depending on the model variation).
    • Clean the screen with brake cleaner or fresh engine oil and a lint-free cloth.
    • Let the screen dry completely before reinstalling.
  3. Replace the Oil Filter
    The TE510’s filter cover is positioned at the bottom of the engine, easily accessible from the left side.
    • Remove the filter cover bolts and gently pull off the cover.
    • Extract the old oil filter; note its orientation for correct installation of the new filter.
    • Install the new filter—you can “prime” it by dipping it in fresh oil before installation to ensure oil circulation on first engine start.
    • Inspect and, if necessary, replace the cover gasket/o-ring to prevent leaks.
    • Reattach the filter cover and tighten the bolts to manufacturer-recommended torque.
  4. Reinstall the Drain Plugs and Oil Screen
    • Return any cleaned oil screens to their position.
    • Wipe the area clean of oil and reinstall the drain plugs. Tighten to spec (consult your service manual for torque values to avoid stripping threads).
  5. Add New Engine Oil
    • Remove the oil filler cap (located near the top or left engine case).
    • Using a funnel, add approximately 1.2 liters (1200 milliliters) of fresh oil. Always double-check your owner’s manual for the exact fill specification for your year and model.
  6. Check Oil Level and Run the Engine
    • Replace the oil cap and start the engine. Let it idle for 3 minutes, then turn it off and let it sit for several minutes.
    • Check the oil level via the sight glass (located on the left engine case) or dipstick. Oil should be halfway up to three-quarters in the sight glass.
    • If needed, add more oil to reach optimal level.

TE510 Model-Specific Tips and Call-Outs

  • The 2007 TE510 features a unique oil screen in addition to the standard cartridge oil filter. Failure to clean this screen can result in inadequate lubrication and potential engine damage.
  • No spring or coil is used behind the oil filter cover for this specific year (unlike some other Husqvarna models).
  • Tilting the bike helps with complete oil draining since the sump design can trap old oil.
  • Recommended oil: 10W-50 synthetic designed for wet clutch motorcycle engines.
  • Always use a filter designed for this model and year. The HiFlo or OEM part ensures proper oil pressure and fit.

Final Checks

  • Inspect for oil leaks around plugs and filter covers after the first ride.
  • Record the maintenance in your logbook to track intervals.
  • Dispose of old oil and filters responsibly at a recycling center.

By following these detailed steps, every 2007 Husqvarna TE510 owner can confidently maintain their bike’s engine and enjoy optimal riding performance. For all your TE510 oil, filter, and accessory needs, trust MotoSport.com.

Related Shopping Categories

Shop Motor Oil for a 2007 Husqvarna TE510 Dirt Bike.

Shop Oil Filters for a 2007 Husqvarna TE510 Dirt Bike.

Shop Oil Drain Pans for a 2007 Husqvarna TE510 Dirt Bike.

Shop Tools for a 2007 Husqvarna TE510 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2007 Husqvarna TE510 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.