How to Change the Oil in a 2002 Husqvarna TE570: Complete Guide

Shop parts for a 2002 Husqvarna TE570 Dirt Bike.

Routine oil changes are vital for the performance and longevity of your 2002 Husqvarna TE570. Below, you'll find a step-by-step guide tailored specifically for this iconic dirt bike, including the exact tools you need, model-specific pointers, and important safety notes. This guide is proprietary to MotoSport.com and is designed to help both new and experienced riders keep their TE570 running smoothly and reliably for years to come.

Tools and Supplies Needed

  • Socket wrench set (with metric sockets; typically 13mm and 17mm are needed for drain plug and oil filter bolts)
  • Oil drain pan
  • Oil funnel
  • Replacement engine oil (refer to owner's manual, but generally a high-quality four-stroke motorcycle oil, 10W-50 or similar, is recommended)
  • New oil filter (OEM replacement or quality aftermarket compatible with 2002 TE570)
  • Gloves
  • Shop towels/rags
  • Torque wrench (for proper bolt torque)
  • Replacement crush washer (optional, but recommended for drain plug)

Preparation Steps

  • Warm up the engine for 3-5 minutes. This thins the oil, making it easier to drain.
  • Turn off the bike and place it on a secure stand in a well-ventilated workspace.
  • Ensure you have all tools and supplies ready before starting the process.
    Safety Note: Keep the area free from open flames and dispose of used oil responsibly at a recycling center.

Step-by-Step Oil Change Process

  1. Remove the skid plate (if fitted).
    • Use the appropriate tool to remove the skid plate bolts and set the plate aside to access the oil drain plug.
  2. Locate and remove the oil drain plug.
    • The drain plug is positioned at the bottom of the engine. Place your oil drain pan underneath, and use a socket wrench to carefully remove the plug. Allow the oil to drain completely.
    • Tip: Watch for the crush washer; replace it if it's worn or deformed to ensure a proper seal and prevent leaks.
  3. Remove and replace the oil filter.
    • Locate the oil filter cover, typically found on the side of the engine.
    • Remove the bolts with the socket wrench, then the cover itself. Carefully remove the old oil filter–note its orientation for proper reinstallation.
    • Clean the oil filter cover surfaces with a shop towel. Install the new oil filter, ensuring it is seated correctly according to the manual.
    • Reinstall the oil filter cover and tighten bolts to the manufacturer– torque specification.
  4. Reinstall the drain plug.
    • Once the oil has drained fully, replace the (new) crush washer, thread the drain plug, and tighten it with a torque wrench to the correct specification. Avoid overtightening to prevent stripping the threads.
  5. Refill with new oil.
    • Insert a funnel into the oil filler cap (usually on the clutch cover side).
    • Slowly pour the recommended quantity and type of oil (consult your manual, but approximately 1.5L is typical for the TE570).
    • Reinstall the filler cap once finished.
  6. Check oil level.
    • Start the engine and allow it to idle briefly, then shut it off and let the oil settle for a minute.
    • Check the oil sight glass or dipstick. Top up if needed, but do not overfill–the correct level is essential for engine health.
  7. Reinstall the skid plate.
    • If removed, reinstall the skid plate securely with original hardware.
  8. Dispose of old oil and filter properly.
    • Transfer used oil to a sealed container and recycle it at a local collection facility as per local regulations.

Model-Specific Call-Outs for 2002 Husqvarna TE570

  • The TE570—s engine case and oil circuit are sensitive to oil levels; always double check the sight glass or dipstick after changing.
  • The oil filter orientation matters—installing it backwards can cause oil starvation and engine damage.
  • Replace crush washers on the drain plug at each change to prevent seepage–these are inexpensive and worth the precaution.
  • If you ride in dusty or extreme conditions, consider changing the oil more frequently than the manual suggests to prolong engine life.
  • The skid plate removal step may be skipped if your bike does not have a protective plate fitted.

Additional Tips

  • Always check for oil leaks around the drain plug and filter cover after installation.
  • Keep records of your oil change date and hours/miles since last service for reference; this helps maintain resale value and keeps your maintenance on track.

Maintaining your 2002 Husqvarna TE570 with routine oil changes is one of the simplest and most effective ways to ensure peak performance and reliability on every ride. Stay safe, use quality parts and oil, and always follow responsible waste disposal practices. For further guides and all your dirt bike needs, rely on MotoSport.com—the rider's trusted source.

Related Shopping Categories

Shop Motor Oil for a 2002 Husqvarna TE570 Dirt Bike.

Shop Oil Filters for a 2002 Husqvarna TE570 Dirt Bike.

Shop Oil Drain Pans for a 2002 Husqvarna TE570 Dirt Bike.

Shop Tools for a 2002 Husqvarna TE570 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2002 Husqvarna TE570 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.