How to Change the Oil in a 1982 Honda ATC110

Maintaining your 1982 Honda ATC110 is crucial for its longevity and performance. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Follow these steps to change the oil in your ATC110.

Shop parts for a 1982 Honda ATC110 ATV.

Tools and Materials Needed

  • Oil drain pan
  • Socket wrench set
  • New oil filter
  • Fresh engine oil (SAE 10W-40 recommended)
  • Funnel
  • Clean rags

Steps to Change the Oil

  1. Warm Up the Engine: Start the engine and let it run for a few minutes. This helps the oil to flow out smoothly when you drain it.
  2. Locate the Drain Plug: Find the oil drain plug under the engine. Place the oil drain pan beneath it to catch the old oil.
  3. Remove the Drain Plug: Use a socket wrench to carefully remove the drain plug. Allow the old oil to completely drain into the pan.
  4. Replace the Oil Filter: Remove the old oil filter using an oil filter wrench. Install the new oil filter by hand, ensuring it is snug but not overly tight.
  5. Reinstall the Drain Plug: Once the oil has fully drained, reinstall the drain plug securely.
  6. Add New Oil: Using a funnel, pour the new engine oil into the oil fill cap. The 1982 Honda ATC110 typically requires about 1.1 quarts of oil.
  7. Check Oil Level: Start the engine and let it run for a minute. Turn it off and check the oil level with the dipstick. Add more oil if necessary.
  8. Dispose of Old Oil: Properly dispose of the old oil and filter at a recycling center.

Important Notes for the 1982 Honda ATC110

The 1982 Honda ATC110 is a classic model known for its durability and reliability. However, due to its age, it's important to regularly check for any oil leaks or unusual engine noises. Always use the recommended oil type & filter to ensure optimal performance. Regular maintenance will keep your ATV running smoothly for years to come.

Related Shopping Categories

Shop Motor Oil for a 1982 Honda ATC110 ATV.

Shop Oil Filters for a 1982 Honda ATC110 ATV.

Shop Oil Drain Pans for a 1982 Honda ATC110 ATV.

Shop Tools for a 1982 Honda ATC110 ATV.

Shop Oil Fillers and Drain Plugs for a 1982 Honda ATC110 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.