How to Change the Coolant in a 2023 Husqvarna TC85
Shop parts for a 2023 Husqvarna TC85 Dirt Bike.
Keeping your 2023 Husqvarna TC85 running cool is crucial for performance on the track and trail. A routine coolant change not only maintains optimal operating temperature but also prolongs the life of your engine and radiator components. The following MotoSport-exclusive guide provides a step-by-step approach tailored to the unique needs of the 2023 TC85.
What Owners Should Know About the 2023 TC85
- High-performance two-stroke engine: The TC85's 85cc powerplant is engineered for hard riding, requiring regular cooling system maintenance due to the heat generated at high RPMs.
- Parallel dual-radiator setup: Both radiators work together for efficient cooling. Ensuring both are properly filled and bled of air is essential for consistent performance.
- Bleed port on cylinder head: This model includes a dedicated coolant bleed screw on top of the head for easy air removal during refilling—an important update over older designs.
What You Need
- Fresh coolant (choose a motorcycle-specific, aluminum-safe coolant)
- Socket set (8mm or as specified for drain bolt)
- Phillips screwdriver
- Drain pan
- Funnel
- Clean rags
- Torque wrench (recommended)
- Gloves and eye protection
Step-by-Step Coolant Change Guide for the 2023 Husqvarna TC85
- Ensure the engine is cool–never attempt to open the cooling system when hot.
- Remove the radiator cap: With the bike on level ground, twist off the radiator cap to relieve any pressure and allow better drainage.
- Place a drain pan under the coolant drain bolt: Locate the coolant drain bolt, usually found on the lower water pump cover. Use the correct socket to carefully remove this bolt and allow the old coolant to drain out completely.
- Inspect drained coolant: Look for discoloration, debris, or oil contamination. These could indicate cooling system issues that need further attention.
- Reinstall the drain bolt: Clean the bolt and replace any crush washer if equipped. Re-torque the bolt to manufacturer specifications (refer to your owner's manual for the correct setting).
- Refill the radiator: Slowly pour fresh coolant into the radiator until it's nearly full.
- Bleed air from the system: Crack open the bleed screw on top of the cylinder head. Add coolant until you see bubble-free fluid exiting the bleed port, then snug the screw back down.
- Top off the coolant: Fill the radiator to just below the cap seat.
- Reinstall radiator cap and check for leaks: Start the engine and let it idle for a few minutes with the bike upright. Monitor the coolant level and check for air escaping from the bleed port if needed. Shut off, allow to cool, and recheck coolant level–top off as necessary.
Pro Tips Specific to the 2023 Husqvarna TC85
- Routinely inspect the radiators for debris and bent fins, as these can block airflow and lead to overheating.
- After muddy rides or races, rinse the radiators with low-pressure water and check that airflow isn't obstructed.
- Always use high-quality coolant. Some coolants designed for automotive engines may cause corrosion or buildup in the aluminum radiators and cylinder head of your dirt bike.
- If your bike feels hot, loses coolant, or you detect white smoke from the exhaust, inspect the system for leaks or possible head gasket failure–address promptly to avoid engine damage.
A regular coolant change on your Husqvarna TC85 is one of the best ways to keep your engine protected and performing at its peak. Whether you're prepping for your next moto or winterizing your machine, stick to this MotoSport maintenance guide for peace of mind lap after lap.
Related Shopping Categories
Shop Radiators for a 2023 Husqvarna TC85 Dirt Bike.
Shop Coolant for a 2023 Husqvarna TC85 Dirt Bike.
Shop Temperature Sensors for a 2023 Husqvarna TC85 Dirt Bike.
Shop Tools for a 2023 Husqvarna TC85 Dirt Bike.
Shop Radiator Hoses for a 2023 Husqvarna TC85 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.