How to Change the Coolant in a 2023 GAS GAS MC 250F
Shop parts for your ride now!Maintaining the right coolant level and quality in your 2023 GAS GAS MC 250F is crucial for optimal engine performance and longevity, especially after aggressive riding or races in muddy and sandy conditions. Here is a comprehensive MotoSport-exclusive guide to correctly changing the coolant on your MC 250F, while covering special notes owners should be aware of for this model year.
Tools & Supplies Needed
- Fresh, model-appropriate coolant
- Clean funnel
- 8 mm or 10 mm socket (for drain bolt, depending on production batch)
- Philips or flat-head screwdriver (for radiator cap and hose clamps)
- Drain pan
- Clean shop towels
- Protective gloves
Preparation & Safety
- Ensure the engine is completely cool – never open the radiator or cooling system components when hot to avoid burns from pressure or hot coolant. Let the bike sit for several hours or overnight if needed.
- Secure your MC 250F on a stable, level stand before starting to prevent accidental spills and make access easier.
- Wipe down the radiator area with a clean cloth to prevent debris from entering the system.
Draining the Old Coolant
- Remove the radiator cap by turning counterclockwise. This allows air in and speeds up draining.
- Locate the coolant drain bolt (commonly on the lower water pump housing on the right side of the engine). Place your drain pan directly underneath.
- Using your socket, loosen and remove the drain bolt. Allow the coolant to fully drain into the pan.
- Inspect the drained fluid – if it is milky, contaminated, or unusually discolored, further inspection of your cooling system is recommended before proceeding.
- Check and clean the drain bolt and sealing washer. Replace the washer if it shows signs of wear or damage to ensure a proper seal.
Refilling & Bleeding Air
- Reinstall the drain bolt and torque to the manufacturer's specification (typically 9-12 Nm; check your manual to confirm for the 2023 model).
- Slowly add the recommended coolant (check your manual for the exact type – using the wrong coolant can compromise engine and seal longevity) into the radiator neck using a funnel to avoid spills.
- The MC 250F features a small bleeder screw on the cylinder head. Loosen this screw once you begin filling the radiator until coolant starts seeping out, which indicates trapped air is escaping.
- Once air bubbles stop and coolant runs steadily from the bleeder, tighten the screw back down.
- Finish topping off coolant at the radiator neck until it sits just below the lip.
- Reinstall the radiator cap, ensuring a secure fit.
Final Steps & System Check
- Start the engine and let it idle with the bike held as upright as possible. Observe coolant circulation and check for leaks around the drain bolt and radiator cap.
- Allow the bike to reach operating temperature, then shut it down and let it cool completely. Recheck the coolant level at the radiator and top off if necessary.
- Dispose of old coolant safely according to your local regulations, as antifreeze is toxic to people and animals.
2023 GAS GAS MC 250F Owner Notes
- The 2023 MC 250F shares its high-performance, competition-focused cooling system with KTM and Husqvarna models. This means tighter system tolerances and greater sensitivity to coolant quality & purity, making regular changes with the correct fluid essential.
- The radiator is compact and efficient for its engine size, but it can be more prone to clogging if ridden extensively in mud or sand. After rides in these conditions, consider blowing out debris with compressed air before changing fluids.
- Frequent coolant changes help prevent internal corrosion and deterioration of seals and water pump components – especially critical if the bike has been overheated or run hard in racing conditions.
- Always consult your owner's manual for fluid types and bolt torque specs specific to your serial number and production batch.
Staying on top of coolant maintenance is one of the most effective ways to protect your MC 250F's engine, keeping you riding further, faster, and longer.
Related Shopping Categories
Shop Radiator Hoses for Your Ride
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.