How to Change the Coolant in a 2023 Beta 350 RR Race Edition
Shop parts for a 2023 Beta 350 RR Race Edition Dirt Bike.
The 2023 Beta 350 RR Race Edition is known for its high-performance engine and premium build, making routine maintenance crucial for both longevity and optimal riding experience. One essential task is replacing the engine coolant, which helps keep your bike running smoothly under demanding conditions. Use the following proprietary MotoSport guide for a clean coolant change–no prior experience required.
What You&ll Need
- New coolant (Engine Ice or any high-quality premixed coolant for aluminum engines is recommended)
- Drain pan
- Basic metric hand tools (socket set, screwdriver)
- Clean rag
- Protective gloves
Step-by-Step Coolant Replacement Guide
-
Prepare your workspace
Ensure the engine is cold to the touch before you begin. Place your Beta 350 RR Race Edition on a stable stand and remove any plastic guards or skid plates that block access to radiators and the water pump. -
Remove radiator cap
Carefully unscrew the radiator cap to relieve any pressure in the cooling system. This is necessary for a full drain. -
Locate and remove the coolant drain bolt
On the 350 RR, the coolant drain bolt is typically found on the water pump cover (right side of the engine). Position the drain pan underneath and loosen the bolt, letting the old coolant flow out completely. -
Flush the system (optional for best results)
Once the coolant is drained, you can pour a small amount of distilled water into the radiator opening to flush out residue. Allow this to drain as well. -
Reinstall drain bolt
Tighten the drain bolt, ensuring it's properly torqued to avoid leaks. -
Refill with new coolant
Slowly pour the new coolant into the radiator until it sits just above the inner radiator core fins. On newer Betas, including 2023 models, there are no separate bleeder screws, so pour in small increments. -
Remove air pockets
With the radiator open, gently rock the bike side-to-side. This helps any trapped air escape and distributes coolant evenly between both radiators. -
Top off coolant and replace cap
Add coolant as needed so it remains just above the radiator fins. Once levels stay consistent after rocking the bike, replace the radiator cap securely. -
Check for leaks & test
Start the bike briefly and let it idle for a minute. Shut it down, allow it to cool, then recheck coolant levels, topping off if needed.
Special Notes for the 2023 Beta 350 RR Race Edition
- This model uses an aluminum engine system – always choose a coolant specified for aluminum components to prevent corrosion or premature wear.
- No radiator bleeder screws on 2020 and newer Betas–all air is released by rocking the bike instead.
- The integrated cooling fan and temperature sensor are installed at the factory and require no intervention during a coolant change.
- Coolant capacity is just over 1 liter; always check your manual for precise specs if you're unsure.
Pro Tips
- Changing your coolant once a year ensures maximum engine protection, especially if you ride in hot, slow, or muddy conditions.
- Check hoses and radiator caps for cracks or wear during every coolant service–leaks can quickly lead to overheating.
- Always dispose of old coolant responsibly, per your local guidelines.
Related Shopping Categories
Shop Radiators for a 2023 Beta 350 RR Race Edition Dirt Bike.
Shop Coolant for a 2023 Beta 350 RR Race Edition Dirt Bike.
Shop Temperature Sensors for a 2023 Beta 350 RR Race Edition Dirt Bike.
Shop Tools for a 2023 Beta 350 RR Race Edition Dirt Bike.
Shop Radiator Hoses for a 2023 Beta 350 RR Race Edition Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.