How to Change the Coolant in a 2022 Honda CRF150R
Shop parts for your ride now. Visit Shop parts for a 2022 Honda CRF150R Dirt Bike. for genuine Honda CRF150R parts and maintenance essentials.
Regular coolant replacement is vital for keeping your 2022 Honda CRF150R running cool on the track – and unlike some maintenance tasks, changing coolant is straightforward and requires only a few basic tools. Whether you ride for fun or competition, this essential guide will help maximize both engine performance and reliability for your unique machine.
Why coolant changes matter on the CRF150R
- High-performance engine: The 2022 CRF150R features a compact, powerful four-stroke engine that makes it a class leader in performance. That power means high operating temperatures – so a well-maintained cooling system is critical.
- Race-ready chassis: The frame and radiator design prioritize performance and access, making maintenance like coolant changes relatively user-friendly for most enthusiasts.
Tools & supplies
- Coolant catch pan
- 8mm socket or wrench (for water pump drain bolt)
- Distilled water (for flushing)
- Fresh dirt bike-approved coolant
- Clean funnel
- Safety gloves & eyewear
Step-by-step coolant change instructions
- Let the bike cool down:
Never remove the radiator cap on a hot engine. Allow your CRF150R to completely cool to avoid burns or pressurized spray. - Remove the radiator cap:
With the bike upright and cool, open the radiator cap to allow the system to vent. - Locate & remove the drain bolt:
The drain bolt is found on the lower part of the water pump (right side of the engine). Place your catch pan underneath and use the 8mm wrench to remove the bolt and copper washer. Old coolant will begin to flow out. - Drain completely:
Tilt the bike side to side gently to fully empty the radiator and engine passages. - Flush (recommended):
Reinstall the drain bolt temporarily and pour distilled water into the radiator. Remove the bolt again, drain the flush, and repeat until the system runs clear. Never use tap water, as it can cause mineral buildup. - Replace drain bolt:
Ensure the copper washer is in good condition and reinstall the drain bolt, tightening securely but not over-torquing. - Add new coolant:
With your funnel in the radiator filler, pour the appropriate amount of fresh coolant until it reaches the neck of the radiator. - Remove air pockets:
Briefly start the bike and let it idle for a few minutes, then shut off and let it cool. Carefully recheck the coolant level and top off as needed. This "burping" ensures trapped air is purged from the system. - Inspect for leaks:
Check the drain bolt, radiator cap, and hose connections for any leaks. After one full ride, recheck coolant levels again, as the system may need a slight top-off.
2022 CRF150R specific tips & notes
- The water pump drain bolt is easily accessible – no need to remove plastics or the fuel tank on this model, making maintenance quick.
- Do not overfill: The expansion tube will vent excess fluid if overfilled – fill only to the radiator neck.
- Correct coolant type: Always use coolant formulated for aluminum engines and dirt bike environments – avoid automotive coolant with silicates or tap water.
- Radiator maintenance: Carefully straighten any bent radiator fins with a plastic brush and ensure the exterior is clear of mud or debris to sustain cooling efficiency.
Performance tip
The CRF150R's compact, high-revving engine means regular attention to cooling is a must, especially if you ride aggressively or in warm climates. If you race, consider upgrading to a high-performance coolant for extra thermal protection.
Stay ready for every ride – with routine coolant service, your 2022 Honda CRF150R will keep its edge all season.
Related Shopping Categories
Shop Radiators for a 2022 Honda CRF150R Dirt Bike.
Shop Coolant for a 2022 Honda CRF150R Dirt Bike.
Shop Temperature Sensors for a 2022 Honda CRF150R Dirt Bike.
Shop Tools for a 2022 Honda CRF150R Dirt Bike.
Shop Radiator Hoses for a 2022 Honda CRF150R Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.