How to Change the Coolant in a 2013 Husqvarna TXC250
Shop parts for a 2013 Husqvarna TXC250 Dirt Bike.
Changing the coolant on your 2013 Husqvarna TXC250 is crucial for engine longevity, consistent performance, and preventing overheating. This guide is tailored to your dirt bike, ensuring a safe and effective coolant change while noting key model-specific advice every owner should know.
What You Will Need
- Correct coolant (typically a 50/50 premix or manufacturer-recommended type)
- Distilled water (if mixing coolant manually)
- Socket set (commonly 8mm for drainage bolt)
- Drain pan or container
- Funnel
- Protective gloves and eyewear
- Fresh sealing washer for the drain bolt (recommended)
Step-by-Step Coolant Change Process
- Preparation
Always work on a cool engine. Remove any bodywork necessary for access to the radiator and filler cap while keeping the bike upright and level. - Drain the Old Coolant
Place the drain pan beneath the water pump area. Open the radiator cap to allow air inthis helps fluid flow. Locate the coolant drain bolt at the water pump and loosen it (commonly 8mm). Let the old coolant drain completely. - Flush the System (Optional but Recommended)
For a thorough job, flush the system with distilled water to remove residues and debris. Pour distilled water into the radiator, replace the cap, start the engine, let it idle briefly, shut down, then drain again. - Reinstall Drain Bolt
Fit a new sealing washer onto the drain bolt and tighten it to the manufacturer's torque spec. This prevents future leaks. - Add Fresh Coolant
Using a funnel, slowly pour fresh coolant into the radiator until it reaches the base of the filler neck. If the coolant is concentrate, mix with distilled water as directed. Also fill the overflow reservoir up to the designated line. - "Burp" the System
With the radiator cap off, start the engine and let it idle for several minutes. Gently blip the throttle and rock the bike side to side to free trapped air bubbles. Watch coolant levels top off if needed. - Check and Refit
When no more air bubbles appear, shut off the engine. Once cooled, double-check the radiator level and reservoir, topping off as necessary. Replace the radiator cap securely. - Clean Up
Wipe up spills and safely dispose of the old coolant according to local environmental guidelines.
2013 Husqvarna TXC250 Model Notes
- The TXC250's radiator and cooling system is engineered for aggressive trail & off-road use, making efficient cooling paramount for longevity during demanding rides.
- Ensure all air is "burped" from the system – trapped air can cause overheating or erratic temperature readings.
- Always use a high-quality, dirt bike-safe coolant – avoid automotive coolants not formulated for motorcycles, as they may contain silicates that can damage water pumps or cause deposits.
- Check hoses and clamps for leaks or wear while the system is open. Replace any suspect components promptly.
- Routine coolant checks (every few rides and at each service interval) will help prevent engine overheating common in off-road racing and extended enduro sessions.
Final Safety & Maintenance Tips
- Never remove the radiator cap on a hot engine – steam and pressure could cause burns.
- Stick to the maintenance schedule recommended by Husqvarna for maximum reliability and performance.
Regular coolant changes keep your 2013 Husqvarna TXC250 running cool under pressure. For OEM and aftermarket parts, service tools, and high-performance coolants, MotoSport has you covered.
Related Shopping Categories
Shop Radiators for a 2013 Husqvarna TXC250 Dirt Bike.
Shop Coolant for a 2013 Husqvarna TXC250 Dirt Bike.
Shop Temperature Sensors for a 2013 Husqvarna TXC250 Dirt Bike.
Shop Tools for a 2013 Husqvarna TXC250 Dirt Bike.
Shop Radiator Hoses for a 2013 Husqvarna TXC250 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.