How to Change a Spark Plug in a 2013 Polaris Outlaw 90

Maintaining your 2013 Polaris Outlaw 90 is essential for optimal performance, and changing the spark plug is a key part of that maintenance. Whether you're a seasoned rider or new to ATV maintenance, this guide will walk you through the process of changing the spark plug in your Polaris Outlaw 90.

Shop parts for a 2013 Polaris Outlaw 90 ATV.

Tools and Materials Needed

  • Spark plug socket
  • Ratchet wrench
  • New spark plug (compatible with 2013 Polaris Outlaw 90)
  • Gap tool
  • Anti-seize compound (optional)

Step-by-Step Guide

Step 1: Locate the Spark Plug

The spark plug on the 2013 Polaris Outlaw 90 is located on the engine's top side. Ensure the ATV is turned off and cooled down before starting the process.

Step 2: Remove the Spark Plug Cap

Carefully pull the spark plug cap off the spark plug. Be gentle to avoid damaging the cap or the wire.

Step 3: Remove the Old Spark Plug

Use the spark plug socket and ratchet wrench to unscrew the old spark plug. Turn counterclockwise until the plug is free. Inspect the old plug for any signs of wear or damage, which can indicate engine issues.

Step 4: Prepare the New Spark Plug

Check the gap on the new spark plug using a gap tool. The correct gap for the 2013 Polaris Outlaw 90 is typically around 0.6-0.7 mm. Adjust if necessary. Apply a small amount of anti-seize compound to the threads of the new plug to make future removal easier.

Step 5: Install the New Spark Plug

Carefully thread the new spark plug into the engine by hand to avoid cross-threading. Once hand-tight, use the spark plug socket and ratchet to snug it up. Do not over-tighten, as this can damage the threads.

Step 6: Reattach the Spark Plug Cap

Push the spark plug cap back onto the new spark plug until it clicks into place. Ensure it is secure to maintain a good connection.

Additional Tips for Polaris Outlaw 90 Owners

The 2013 Polaris Outlaw 90 is known for its reliability and ease of maintenance. Regularly check the air filter and oil levels to keep your ATV running smoothly. Additionally, inspect the tires and brakes before each ride to ensure safety.

By following these steps, you can easily change the spark plug in your 2013 Polaris Outlaw 90, ensuring it continues to deliver the performance you expect. Regular maintenance not only extends the life of your ATV but also enhances your riding experience.

Related Shopping Categories

Shop Spark Plugs for a 2013 Polaris Outlaw 90 ATV.

Shop Engine Tools for a 2013 Polaris Outlaw 90 ATV.

Shop Feeler Gauges for a 2013 Polaris Outlaw 90 ATV.

Shop Batteries for a 2013 Polaris Outlaw 90 ATV.

Shop Tools for a 2013 Polaris Outlaw 90 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.