Air Filter Cleaning & Replacement Guide for 2017 Husqvarna FX350

Shop parts for a 2017 Husqvarna FX350 Dirt Bike.

The air filter is a crucial component ensuring the performance & longevity of your 2017 Husqvarna FX350. Regular inspection, cleaning, and timely replacement prevent engine-damaging debris and dust from entering the intake, maintaining horsepower on everything from tight woods singletrack to fast MX laps. This step-by-step MotoSport guide is tailored to your 2017 FX350noting characteristics unique to the modeland designed for both new and experienced riders.

What Makes the 2017 FX350 Air Filter Unique?

  • The FX350 uses a large, dual-layer foam air filter mated to a sturdy filter cage with tabs for a secure fit.
  • The airbox design allows toolless filter removal for quicker servicingan exclusive feature among Husqvarna's off-road line in 2017.
  • The 2017 FX350 uses the same filter format as some KTM and Husqvarna models, but the side panel release and airbox shape are FX-specificalways verify part fitment.

Essential Items

  • Fresh air filter (OEM or quality aftermarket)
  • Filter-specific cleaning solvent or biodegradable cleaner
  • Air filter oil & grease (not standard engine oil)
  • Disposable gloves & clean rags

Air Filter Removal

  1. Use the quick-release panel latch on the left side of the FX350 to access the air filter without tools.
  2. Identify the dual tabs securing the foam filter cage. Release both tabs gently to avoid frame or cage damage.
  3. Carefully remove the entire filter and cage as one unit, keeping the filter facing upward to prevent contaminants from dropping into the intake boot.

Cleaning Your FX350 Filter

  1. Tap the filter gently over a trash bin to remove loose dirtdo not hit or wring out the foam, as this can damage the structure.
  2. Place the filter in a bucket of appropriate cleaning solvent or biodegradable cleaner; work the solution through the foam by hand, squeezing but never twisting excessively.
  3. Rinse thoroughly with clean, cool water. Repeat with mild soapy water if necessary for stubborn residues, then rinse again.
  4. Gently squeeze out excess water (never wring like a cloth); let the filter air dry completely out of direct sunlight.

Oiling & Reinstallation

  1. Apply filter-specific oil evenly to all foam surfaces. Massage the oil in thoroughly; coverage should be complete but not dripping.
  2. Lightly grease the sealing lip to protect against dust intrusion at the mounting face.
  3. Fit the cleaned & oiled filter back on the cage, securing the tabs. Ensure the filter seats evenly against the airbox for a tight seal.
  4. Close the side panel securely.

Replacement Tips

  • Replace the air filter if it shows tears, hardened foam, or excessive stainingdamaged filters cannot protect your engine.
  • Consider rotating two filters: one in use, one cleaned & oiled, ready as a backup on ride days.
  • Inspect the airbox and intake boot with each filter service; wipe away any residual dust or sand.

Model-Specific Owner Notes

  • The FX350's 350cc DOHC engine is sensitive to air restrictionkeep the filter clean for peak throttle response and minimal starting issues.
  • Thanks to the FX's quick access airbox, filter maintenance is much faster than on many competing dirt bikes. Take advantage by servicing after every wet or dusty ride, or every 5-10 hours in normal conditions.

Stay ahead of engine wear & always ride with confidence—regular air filter care is your best insurance on the 2017 Husqvarna FX350.

Related Shopping Categories

Shop Air Filters for a 2017 Husqvarna FX350 Dirt Bike.

Shop Air Filter Oil for a 2017 Husqvarna FX350 Dirt Bike.

Shop Air Box Covers for a 2017 Husqvarna FX350 Dirt Bike.

Shop Tools for a 2017 Husqvarna FX350 Dirt Bike.

Shop Intake Parts for a 2017 Husqvarna FX350 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.