Aluminum or Titanium / OEM Offset:
Works Connection Titanium Offset Foot Peg Mounts.
- Made from Aircraft-Grade 7075-T6 Aluminum or Grade 5 6AL-4V titanium.
- O.E.M. replica.
- Manufactured with tighter tolerances than O.E.M. parts.
- 35% lighter than O.E.M. mounts.
- You can use ANY pegs you like with these mounts.
- Laser engraved logos.
- Sold as a set.
Aluminum / -5mm Back / -5mm Down:
Works Connection enlisted the help of veteran test rider Kris Keefer to test various different offsets to come up with what he felt was the best setup. The amount to offset the mounts was the 'key' to figuring out a better feel, more comfort and a less cramped feel.
"Even though Yamaha changed their footpeg offset in 2023, I still feel like the rider triangle needed work. Opening up the footpeg placement has helped me with my positioning on the bike when rolling my corners." -Kris Keefer, Keefer Inc. Testing.
- Made from aircraft-grade 7075-T6 aluminum.
- Lowers pegs by 5 mm, and moves pegs back or rearward 5 mm.
- Manufactured with tighter tolerances than O.E.M. parts.
- Opens rider triangle, and makes it easier going from sitting to standing.
- Peg mounts are compatible with stock (O.E.M.) pegs and aftermarket pegs.
- Laser engraved logos.
- Sold as a set.
Aluminum / -5mm Back / -7mm Down:
"I have played with several offset pegs the past couple years and the one I always came back to was -7 mm down and -5 mm back. Some of my test riders range from 5'8" - 6'2" and they all thought this setting was the most comfortable." -Kris Keefer, Keefer Inc. Testing.
- Made from aircraft-grade 7075-T6 aluminum.
- Lowers pegs by 7 mm, and moves pegs back or rearward 5 mm.
- Manufactured with tighter tolerances than O.E.M. parts.
- Opens up rider triangle, and makes it easier going from sitting to standing.
- 42% lighter than O.E.M. mounts.
- Peg mounts are compatible with stock (O.E.M.) pegs and aftermarket pegs.
- Laser engraved logos.
- Sold as a set.
Aluminum / -10mm Back / -10mm Down:
"I have played with several offset pegs the past couple years and the one I always came back to was -7 mm down and -5 mm back. Some of my test riders range from 5'8" - 6'2" and they all thought this setting was the most comfortable." -Kris Keefer, Keefer Inc. Testing.
- Made from aircraft-grade 7075-T6 aluminum.
- Titanium pins.
- Lowers pegs by 10 mm, and moves pegs back or rearward 10 mm.
- Manufactured with tighter tolerances than O.E.M. parts.
- Opens rider triangle, and makes it easier going from sitting to standing.
- Peg mounts are compatible with stock (O.E.M.) pegs and aftermarket pegs.
- Laser engraved logos.
- Sold as a set.
- Note: Must remove (Right Side) foot peg mount to grease linkage bolt.