I’m a pro level rider. I put this chain guide on my bike and that day the chain derailed on a step on step off. It was a horrible crash and I can only point to the chain guide for the failure due to my chain and sprocket being in great condition and perfectly tight. I will never buy from this company again.
- 31 reviews
- 10 reviews
- 0 reviews
- 3 reviews
- 6 reviews
Bought this 2 months ago, B*tch rips best guide out there!
Color matched my bike perfect
The blue doesn’t not match a Yamaha!!!! Threads on one bolt were so messed up out of the package I had to get new...
My purchase is doing exactly what I had expected.
Yup it works. Fits perfectly. Great price
Bought a month ago and installed it right away due to my OEM slider being worn out. The installation was easy although no instructions were provided to show the orientation of the slider blocks. I was able to figure it out and all was good. It was worth the cost.
I bought this at the first of the week and recieved it two days later. I took it out of the box and was impressed with the quality of construction for the price. I put the slider on and went to mount it and the holes are about 1/2" too close to fit my 2009 YZ 250, even though it says it's an exact fit. For the price, I will just drill a new hole in it, but I am not impressed with Turners products.
Very happy with the style and easy to install...
- Answered: 9
- Not Yet: 1
Question asked by Yz450
Question:Q: I am buying this part for a 2005 yz 450f. Is this product complete? Will I need to buy blocks or anything else to install and ride? I have never purchased one so not sure if everything is included. I will also be purchasing sliders.Question asked 4 months 16 days ago
Question answered by MichaelUser's contributor status: Top 10Question answered 4 months 16 days agoAnswer: A: Hardware included.
Note: NOT compatible with O.E.M. or Acerbis chain guide blocks.
Question asked by James
Question:Q: I'm putting this on a 2006 300xcw. The top forward screw is too short to place over the plastic guard mounted to the swingarm above the chain. Does the plastic guard mounted to the swingarm above the chain serve a necessary function? Can I take it off?Question asked 1 year 6 months ago
Question answered by DaveGearheadUser's contributor status: Top 10Question answered 1 year 6 months agoAnswer: A: We do not recommend removing OEM parts from your bike without consulting a service tech at your local KTM dealership. They can advise you of the ramifications of removing parts.
Question asked by RawDoggin
Question:Q: Replacement SliderQuestion asked Over 3 years agoDo you offer the rubber guide replacement for this? I've still got the Turner slider on my bike but the rubber inside has fell out.
Question asked by Grabt
Question:Q: Will this work on my Kawasaki 2002 kx125Question asked Over 4 years ago
Question answered by MotoSportExpertUser's contributor status: Expert MotoSport StaffQuestion answered Over 4 years agoAnswer: A: Yes. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct guide for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Question asked by MrSomebody
Question:Q: Do you guys make one of these for a 2001 Gas Gas EC 300?Question asked Over 4 years agoI bought an adapter to use a traditional chain guide rather than the industrial looking device that's currently on there, so I'm wondering if there's a big difference between modern dirt bikes that necessitates a different chain guide for each bike. If it's the same between say, a CR250 and a KTM 300, I imagine it will work with my adapter. However, I'd like to make sure.
Question answered by MotoSportExpertUser's contributor status: MotoSport Staff ExpertQuestion answered Over 4 years agoAnswer: A: Unfortunately Turner does not offer one to fit your 2001 Gas Gas EC 300.
Question asked by whistler9466
Question:Q: Ive puchased this product. good product bottom plate showing lot of wear is this a piece i can purchase seperate?Question asked Over 6 years ago
Question answered by MotoSportExpertUser's contributor status: Top 10Question answered Over 6 years agoAnswer: A: We do not have the replacement guide blocks for the Turner Rear Chain Guide. You may be able to use one from a different brand like TM Design works with some modification.
Question asked by 12crf450x
Question:Q: Would this work with a 55 tooth rear sprocket?Question asked Over 6 years ago2012 Honda crf450x went from a 51 stock rear to a 55 tooth.
Question answered by MotoSportExpertUser's contributor status: MotoSport StaffQuestion answered Over 6 years agoAnswer: A: Unfortunately I have not used this chain guide with a sprocket that large. With that said, typically with a sprocket that large you will run into additonal wear and tear on the chain guide (if it even fits). You may want to consider removing an additional tooth from the front sprocket and running a smaller rear such as 52 tooth to guarantee fitment and prevent the extra wear caused by running a rear sprocket that large.
Question asked by DubaiDave
Question:Q: Does this guide have an Upper Block?Question asked Over 6 years agoDoes this guide have an Upper Block as well as the lower? I can only see a lower block in the photo. Thanks, Dave.
Question answered by MotoSportExpertUser's contributor status: MotoSport StaffQuestion answered Over 6 years agoAnswer: A: Yes these guides do have upper and lower wear blocks.
Question asked by DubaiDave
Question:Q: Can you buy replacement blocks for this?Question asked Over 6 years agoIs it possible to purchase replacement inner blocks for this when they wear out?
Question answered by MotoSportExpertUser's contributor status: MotoSport StaffQuestion answered Over 6 years agoAnswer: A: This is a 3 piece chain guide, but unfortunately Turner does not offer a replacement block for it.
Question asked by Yamaha426
Question:Q: Does this chain guide require a seperate inner block or is it all includedQuestion asked Over 7 years ago
Question answered by MotosportStaffUser's contributor status: MotoSport StaffQuestion answered Over 7 years agoAnswer: A: The rub block on the inside is included with the guide.
Question answered by getBmanUser's contributor status:Question answered Over 7 years agoAnswer: A: I removed my stock guide and this replacement included all the parts required to bolt right on. Bolts and the inner block were included.
Question answered by ZinkUser's contributor status:Question answered Over 7 years agoAnswer: A: Everything is included except the metal dowels that press into the top block. This product requires the re-use of the metal dowels from your oem chain guide.
Question answered by JohnUser's contributor status:Question answered Over 7 years agoAnswer: A: The Guide has both an upper and lower block included. All you do is remove the old guide and put this one on and you are good to go. Took me about 5 minutes to install and it has held up really nice. Def looks a lot better than the stock unit too.