Self Cancelling Turn Signal Module

• Product Details

  Turn Signal Module:

  The Self Canceling Turn Signal Module is an electronic flashing relay that is meant to completely replace your existing mechanical flashing relay(s), or be a stand-alone flashing relay to vehicles that do not have turn signals. It works with both LEDs or incandescent lights up to 10 Amps per output (20 Amps maximum). This module does not require any load equalizers because it is a self-timed electronic relay.

  Please Note:

  The Self Canceling Turn Signal Module requires momentary push buttons to operate (not included, sold separately). Latching-type switches, or push to cancel type switches, will not work properly because these types of switches send constant power to your turn signals when on and will defeat the main purpose of the self canceling feature.

  Features:

  • No flasher relay needed.
  • Three (3) user selected flash periods.
  • Automatically self-cancels.
  • Works with LEDs and incandescent.
  • Hazard flasher feature built in.
  • Waterproof and heat resistant.

  Turn Signal Modes:

  • Mode 1: Press turn signal button for 1 second, turn signal light will flash for 7 seconds, then self cancel. This mode is usually used when changing lanes.
  • Mode 2: Press turn signal button for 2 seconds, turn signal light will flash for 20 seconds, then self cancel. This mode is usually used when slowing down to go around a corner.
  • Mode 3: Press turn signal button for 4 seconds, turn signal light will flash for 75 seconds, then self cancel. This mode is usually used when stopping at a signal light and turn will be made after stopping.
  • Mode 4: Hazard Mode - is available all the time and will flash until cancelled. To engage, depress both the left and right turn signal buttons for 1 second. To cancel, depress both buttons again for one second.
  • Note: The first three modes above can be cancelled by pressing the same turn signal button a second time.

  Specifications:

  • Part Number: 01501.
  • Weight: Less than 1 pound.
  • Amp limit: 10 Amp per output (20 Amps maximum).
  • System requirement: 12VDC(-).
  • Attachment method: Included double-sided adhesive pad.
  • Height (inches): 5/8.
  • Length (inches): 2-1/4.
  • Width (inches): 1-5/8.
  • Wire length (inches): 5 - 6.
  • Material: Anodized aluminum case with heat and water-resistant potting.
  • Wire: 16AWG - 20AWG.
  • Package contents: One (1) Self Canceling Turn Signal Module, one (1) adhesive mounting pad.
  • Color / finish: Black anodized.
  • Hardware included: No.
  • Connectors included: No.
  • Tools required: Wire cutters / splices.
  • Waterproof: No.
  • Water resistant: Yes.
  • Heat and vibration resistant: Yes.
  • Companion product(s): N/A.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• # Part Numbers

  Product Variant	Manufacturer Part #
  Signal Dynamics Self Cancelling Turn Signal Module	01501

Find More