SealSavers Zip-On's are a revolutionary design that allows for quick and easy installation and cleaning without having to remove your forks from the triple clamps. They act as a pre-wipe, wiping away dirt, dust and mud that has accumulated onto the forks, and preventing it from getting into your fork seals as your forks compress. The SealSavers Zip-On has a unique dual-flap zipper protection system that is utilized to protect your forks from the nylon zipper. When installed and the protection flaps are sealed, Zip-On's look almost identical to the original SealSavers Zip-On and offer the same great protection.
- The SealSavers Zip-On's protect the seals from dust, dirt and mud.
- SealSavers Zip-On' are durable and washable and will not effect your fork damping or preload.
- Sold as a pair.
Simply wrap around and zip the SealSavers Zip-On onto the fork tube, slide up and cover the seals. Apply the zip tie to the largest portion of the fork tube so the fork guard rubs on the zip-tie. When washing your bike, flip up the bottom side of the SealSavers Zip-On to wash any small amount of dirt that has gathered. Be sure to flip the SealSavers Zip-On back down before they dry. Yes, you can remove to wash and re-install, however be sure to have spare zip-ties.
Note:
If there is the circlip around the larger fork tube, take a flat head screwdriver and pop that off. Place the zip-tie where that was to allow the fork guard to rub on the zip-tie and not on the SealSavers.
