The SCOTT Prospect WFS Goggle possesses the same great features than the Prospect. It is equipped with a WFS roll-off system for a large field of vision even in the muddiest conditions. The canisters can be clipped directly on the WORKS pins of the lens which makes their installation much easier and less time consuming. It takes almost no effort as there are no tools required. It also makes the switch from roll-off to tear-off simple and fast. The improved, transparent anti-stick grid offers a better field of vision, an easier installation in the canisters, a better sliding on the lens and a better sealing with the lens at the top.
- Frame Technologies:
- 50 mm Works Film System canisters.
- SCOTT anti-stick grid with mudflap.
- Lens Lock System.
- Articulated outriggers.
- NoSweat three-layer molded face foam.
- Extra-wide no-slip silicone strap.
- Lens Technologies:
- SCOTT TruView single WORKS lens.
- NoFog Anti-Fog lens treatment.
- Extras:
- Two rolls of film.
- Microfiber goggle bag.
- Noseguard.
Works Film System Canisters: SCOTT Works Film System (WFS) consists out of two canisters - the Works Motorside Canister and the Works Supplyside Canister. Both will be attached to the lens of the goggle. The Works Motorside Canister has a strong engine and enough space to roll off the full dirty film. The Supplyside Canister holds the film.
NoFog Anti-Fog Lens Treatment: SCOTT lenses undergo a permanent No Fog treatment process to prevent condensation and fogging.
Click-On Canisters: No need for tools, no need to waste time; simply click the canisters onto the WORKS pins and ride. The red lever makes sure the canister is safely attached to the pins. This system is the ultimate in WORKS technology: switching from roll offs to tear offs has never been this easy. One lens does it all!
Integrated Canister Design: By designing the canisters behind the outriggers, they are positioned on the very edge of the lens, achieving maximum peripheral vision. With the strap wrapping around the canisters, the rope becomes easier to locate as you simply have to slide your hand along the strap until you find it.
NoSweat Three-Layer Molded Face Foam: This unique face foam consists of a microfiber layer which is extremely water absorbing. It soaks up moisture super fast and avoids sweat getting into your eyes or inside the goggle.
Articulated Outriggers: The Prospect has two pivoting outriggers that adapt to any helmet shape and size. The resulting pressure created by the goggle on the rider's face provides a complete and consistent seal. For the Prospect WFS the pivoting outriggers enable a slick integration of the canisters for an unmatched look even with the roll-offs attached.
Lens Lock System: The lens lock system by SCOTT has been designed to guarantee the safest lens retention on the market. To avoid the lens coming out, SCOTT has designed this innovative lens lock system which features four locking pins that go through the lens instead of grabbing it from the top.
Removable Noseguard: The Prospect nose guard can be easily removed and re-assembled. Three pins guarantee the nose guard attachment to the frame.
