This item is considered hazardous material. Orders containing this product will ship ground only and cannot be shipped to Alaska, Hawaii, US Territories or outside the United States.
Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high temperature stability, extreme-pressure protection, and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100F to 500F and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. The exceptional extreme-pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%. Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants.
Outperforms the best conventional or synthetic greases and lubes.
Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints.
Excellent high-temp stability, extreme-pressure protection, and water resistance.
Used in a variety of applications with operating temps from -100F to 500F.
Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals.
Contains an organic moly for chassis lubrication and high-temp / high-speed industrial equipment.
Synthetic fluidity allows increases in bearing life up to 200%.
Used by many of the best engine builders, engineers, and technicians in Formula 1, GP2, Formula 3, NASCAR, NHRA, and many more.
Note: Will darken after high-temp use - not detrimental to performance.
Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high-temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will slightly darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.