Street Bike Tire Changer Adapter

• Product Details

  Universal Big Hub Adapter (32 - 68 mm) for Street Bike Tire Changer.

  Universal adapter for single-sided swingarm wheel hubs to be used with the Rabaconda Street Bike Tire Changer. Works between 32 - 68 mm hubs. This adapter is also compatible with the Motorcycle Wheel Balancer.

  When using the adapter:

  • Install the adapter on the wheel hub and tighten it by hand.
  • Place the wheel over the standard center spindle.

  For information: The original spindle is 20 mm and, together with the stepped bushing, it can be used on hubs between 20 - 32 mm.

  Notes:

  IMPORTANT Rabaconda recommends measuring your bike's hub sizes before buying an adapter or spindle. The Universal Big Hub Adapter is NOT compatible with BMW motorcycles.

  BMW Shaft Drive Type Adapter for Rabaconda Street.

  The BMW Shaft Drive Type adapter is a 62 / 72 mm adapter for BMW shaft drive type wheels that's compatible with Rabaconda's Street Bike Tire Changer as well as their Motorcycle Wheel Balancer.

  • Suitable for K1600 72 mm hub and 62 mm hubs of GS / GSA, K1200, R1200, R1250, R nine T, F800GT, F800 ST/S and some other models.

  For information: The original spindle is 20 mm and, together with the stepped bushing, it can be used on hubs between 20 - 32 mm.

  Notes:

  You also need a wider Duck Head Kit for Cross-Spoked Rims where spokes run out to the sides of the rim (like on modern BMW GS, Triumph Scrambler, Triumph Tiger, newer Honda Africa Twins, Ducati Multistrada, Moto Guzzi V85, etc.), where the side of the rim is thicker due to spoke placement and standard duck head will not fit. Please see the Duck Head Kit for Cross-Spoked Wheels for Street Bike Tire Changer. IMPORTANT Rabaconda recommends measuring your bike's hub sizes before buying an adapter or spindle.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• # Part Numbers

  Product Variant	Manufacturer Part #
  BMW Shaft Drive	SBAD2
  Universal / 32mm-68mm	SBAD1

Find More