The Oxford Heaterz Premium Retro heated handlebar grips are made especially for retro bikes. The grips have ergonomically engineered surface structures to optimize riding performance. Soft, grippy diamond tread is for comfort and rider feedback. The grip length is 4.72" (120 mm) but can be trimmed to 4.45" (113 mm) if required and has open ends for bar end weights. What really sets the Oxford Heaterz apart? The answer is many tried and tested features such as the silicon cables which provide flexibility in the coldest weathers and the winter-grade wiring prevents cracking and short circuits; the bonded grip design has been in use for many years and is well proven; the grip compound and thermo plastic rubber construction is designed to absorb vibration making them extremely comfortable and durable, often outlasting standard grips and the silicone wires that come from the grip are angled to eliminate water ingress and resulting corrosion / ice damage and have special unique internal supports which are heat shrunk together to prevent damage if the wires are snagged. In addition, five carefully chosen heat settings allow the perfect temperature to be selected in ALL weather and most importantly, the switch will switch off if the voltage drops to 10.5V to ensure that the battery is not damaged to the point that it cannot be fully recharged. This latest Premium range is the result of over 30 years of research and development by engineers and motorcyclists, which are now easier than ever to fit due to the new intelligent heat controller eliminating any need to wire the positive to a live ignition feed; simply connect the 2 ring connectors to the battery. You'll find everything supplied by Oxford to fit your Heaterz from a wiring loom with ring connectors to the battery with simple plug-and-play waterproof connectors to attach to the switch and grips, smart mounting bracket and switch right down to the glue and cable ties all neatly packaged in one box
Sealed for life.
Up to 122F (50C).
Draws under 4A.
Fits most 7/8" handlebars.
Soft, grippy diamond tread is for comfort and rider feedback.
Molded wiring arrangement is both durable and discreet.
Grip design fits the vast majority of bikes, but can be cut down in size if required.
One-piece molded construction ensures unrivalled performance and reliability.
Standard length: 4.72".
Minimum cut length: 4.45".
Grip outer diameter: 1.31".
Standard for all Heaterz Premium EL6 models:
Five heat settings give the perfect operating temperature with LED lights to indicate the level.
These Premium Retro Heaterz are designed as a replacement for the handlebar grips already fitted to the motorcycle. They will fit onto most motorcycles that use 7/8" (22mm) diameter handlebars. Each grip has an open end to allow the bar end weight to be refitted without the need to trim the grip. The standard length of the Premium Retro Heaterz grip is 4.72" (120 mm). Should the length need to be shortened, they can be trimmed to a minimum length of 4.45" (113 mm) without damaging the heating elements. External grip diameter = 1.31" (33.3 mm).
WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov.