The Oxford Heaterz Premium Cruiser heated handlebar grips are made especially for cruiser bikes. The grips have ergonomically engineered surface structures to optimize riding performance. These Heaterz are specifically designed for motorcycles with 1" handlebars. The Soft grippy rubber provides comfort and control. The grip length is 5.43" (138 mm) but can be trimmed to 4.68" (119 mm) if required and has removable chrome end caps so that bar-end weights can be fitted. What really sets the Oxford Heaterz apart? The answer is many tried and tested features such as the silicon cables which provide flexibility in the coldest weather and the winter-grade wiring prevents cracking and short circuits; the bonded grip design has been in use for many years and is well proven; the grip compound and thermoplastic rubber construction is designed to absorb vibration making them extremely comfortable and durable, often outlasting standard grips and the silicone wires that come from the grip are angled to eliminate water ingress and resulting corrosion / ice damage and have special unique internal supports which are heat-shrunk together to prevent damage if the wires are snagged. In addition, five carefully chosen heat settings allow the perfect temperature to be selected in ALL weather and most importantly, the switch will switch off if the voltage drops to 10.5V to ensure that the battery is not damaged to the point that it cannot be fully recharged.
Standard Features for all Heaterz models:
Sealed for life.
Up to 122F (50C).
Draws under 4A.
Two year warranty.
This latest Premium range is the result of over 30 years of research and development by engineers and motorcyclists, which are now easier than ever to fit due to the new intelligent heat controller eliminating any need to wire the positive to a live ignition feed; simply connect the two ring connectors to the battery. You'll find everything supplied by Oxford to fit your Heaterz from a wiring loom with ring connectors to the battery with simple plug-and-play connectors to attach to the switch and grips, smart mounting bracket and switch right down to the glue and cable ties all neatly packaged in one box.
Additional Heaterz Premium Features:
Ergonomically engineered grip surface structures.
Soft grippy rubber provides comfort and control.
Removable chrome end cap keeps original styling (includes two (2) additional dark chrome end caps).
Replacement throttle tube for pre-fly-by-wire throttle Harley-Davidson models.
Throttle adaptor tube for Honda motorcycles.
New Switch Features:
Five heat settings give the perfect operating temperature with L.E.D. lights to indicate the level.
Intelligent Heat Controller:
Raised and tactile silicone buttons for use with gloved hands.
Battery Saving Mode turns the grips off if you forget.
Clutch mounting bracket and fitting kit included.
New mounting bracket for 1" handlebars (including chrome and black covers).
These Premium Cruiser Heaterz are designed as a replacement for the handlebar grips already fitted to the motorcycle. They will fit onto most motorcycles that use 1" handlebars. Each grip has an open end to allow the bar-end weight to be refitted without the need to trim the grip. The standard length of the Premium Cruiser Heaterz grip is 5.43" (138 mm). Should the length need to be shortened, they can be trimmed to a minimum length of 4.68" (119 mm) without damaging the heating elements.
WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov.