Not a good fit at all for my 2000 cr250r! The bottom port of the right (cap) side was pointing in the complete wrong direction. And the unit itself was too long and rested on the top of the expansion chamber which cause the mount holes to be off. On a positive note, Motosports customer service handled the return very well. I will definitely consider Motorsport for future purchases. Just not anything from Myler!
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
I have gone through 2 of these now. The first one the company warranties which was nice but now the one they sent me has broken. Both broke the same exact way. Definitely a manufacture problem. I bought one more just so I could race this weekend. If it fails again I will be going back to oem or the more spendy one! Food for thought people
Bought and installed this to replace a factory on my sons CRF150RB that cracked where the hose connected to the bottom
Of the radiator. The new one is solid and has very good welds all around every hose port. The whole thing is just heavier duty then the OEM radiators. Been running great in the south Florida heat for about 2 months now and the only thing I have to do is shine it up after a day of riding because it has a great polished finished look to it as opposed to the matte or flat finish of the factory radiator. Fit perfect too.
These radiators mounted up with no issues at all. They are built real well with nice thick aluminum.
Have 2 rides on it so far and zero problems. Looks good and much sturdier than stock.
Definitely recommend this over OEM. Fits good and looks great. Holds up in a crash well too..
What a pile of cr@p! You have to cut the upper hose, dent the top of the exhaust, and force the mounting holes to line up. If I wasn't in a pinch I would have sent it back. Buy OEM its worth the extra money!
This radiator fit my 2017 KX 250F right side pretty good but I added a Unibiker radiator guard (so I did not need to repeat this process again) and there were some alignment issues on this side but not on the factory left side that required a fastener change and some forcing to make it work. I have 2 rides on it and it seams to be doing it's cooling job well so I cannot complain.
Easy install if you have a little, git-er-done , in ya. Hoses had to be shortened, and a minor plier bend of a tab, but overall good product. Radiator fins are super weak so you need to be getting or have guards as well.
Height- 14 1/2"