The Rev2 throttle has several different size reels that will change how much twist is necessary for the throttle to completely open the carbs or throttle bodies on a motorcycle. The larger the reel is, the shorter the twist. Each reel size will shorten the twist by about 10 degrees. If your stock throttle has a 40 mm reel and stock twist is 90 degrees (1/4 turn), the 45 mm reel will reduce the twist to 80 degrees and the 50 mm reel will reduce it to 70 degrees. The 35 mm reel will increase the throttle twist to approximately 100 degrees. This is just an example; every model of motorcycle is different.
The included cam reel has a progressive profile that allows the throttle to act like a sensitive, long twist throttle during the initial small throttle openings for precise control and then acts like a more aggressive short twist throttle at large throttle openings, progressively shortening the amount of twist needed to reach full throttle.
- The second generation of Motion Pro's innovative reel changing system lets you tailor the throttle rate to riding conditions and rider preference.
- New ultra-compact housing with snap-together elbows makes it easy to install and change reels.
- Sleek new design requires less handlebar space for lever clearance and throttle position.
- Use smaller reels for slower throttle rate and larger reels for faster throttle rate.
- Included cam reel provides progressive throttle response preferred by some riders.
- Unique reel design allows fast reel changes.
- Cable boot keeps dirt and dust out for reliable and smooth operation.
- Billet aluminum in-line cable adjusters for easy installation and adjustment.
- Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight.
- Upper section of cables use 6 mm housing to provide solid support of adjusters.
- Simple to install and maintain.
- Designed by Motion Pro.
- Patent pending.
Kit Includes:
- Complete Rev2 Throttle Assembly with throttle tube.
- MX / off-road kits include the Titan Throttle Tube.
- High quality Motion Pro black vinyl cables (specifically designed for your bike).
- Interchangeable reels: 35, 40, 45, and 50 mm and the MX/Off-Road reel (MX / off-road kits ONLY).
- Street / road race kits include Motion Pro RoadControl grips and MX / off-road kits include Motion Pro DirtControl grips.
- Cam reel (street / road race kits include Street/Road Race cam reel and MX / off-road kits include MX/Off-Road cam reel).
- Rev2 Throttle Equipped decal set.
- Printed color instructions.
Important Note:
The Rev2 throttle does not have the starter and kill switch wiring or switches that are built into some model's stock throttle assembly. In those cases, use of the Rev2 Throttle requires an aftermarket kill switch and starter button assembly (Motion Pro P/N 11-0098) not included in kit. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt-on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.
