Great plate for my XR650,since they come stock with nothing but a couple little tubes for protection.One thing you need to do is give it a little buffer between the plate,and frame,or it vibrates pretty bad.I just used a couple rubber bushings between frame,and plate.Worked like a charm.
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Quality plate with good hardware. I have this on both my bikes.
quick shipment supper easy to install with the factory pre drilled holes. wicked solid and with the p3 skid plate foam there is no add reverb noise.
Awesome skid plate. Has already saved my motor numerous times. Made out of pretty thick aluminum, but not too heavy. The wings on both sides are great extra protection for the case and water pump. Seems like it will take a beating for years to come.
Fits really tight and so far seems to be staying in place. Recommend some threadlocker on the screws because they face down and its easy to imagine one rattling loose and falling out. Otherwise, hard to imagine how someone could make a better skid plate than this
Basic looking but far better in the protection department. Does its job very well, worth the money.
I would have given this skid plate 5 stars but.... the mounting hardware that came in the package were torque drive button head screws! I have no problem with button head screws but torque drive? Really?? Why they didn't just send hex drive button head screws or hex head screws like the factory installed on their skid plate?? I had to make a trip to the hardware store to buy the correct size torque bit to install the hardware. Other than that everything mounted up just fine and I'm sure the skid plate will do the job.
Couldn't be better, covers everything a skid plate possibly could, easy to install use tape to hold the mounting clamps in place to make things go faster. Super stoked right now!
I purchased this skid plate for my California model xt 250. The charcoal canister needs to be moved up one bolt hole higher in order to fit. Also the lower part of the canister shield needs to be to be trimmed. The hoses that run into the top can be cut down
for a clean fit. Other than that it fits perfectly. No need to modify the plate itself.Also only one bolt is needed to hold the canister securely. It works!
It was easy to install and has hole for oil drain. Just as advertised.