The kit included an incorrect bolt which I did not realize until I had already threaded it into the bike. Be careful if your kit has a M10 x 1.5p bolt. The engine mounts are M10 x 1.25p on the 2016 R6 Anniversary Edition! A coarse thread will thread into a fine thread fairly easy since the fine thread has a larger pilot hole so be careful. The bar ends are an OEM and a GYTR bar end but it doesn't mount like the OEM so I threw the GYTR bar ends away and kept the OEM bar ends.
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
easy install, looks great. hopeful i never have to put them to the test. these should come from the factory.
I have used other frame sliders on my previous bikes and none seem to fit the way these have. I installed them on my 2012 R1 and installation is simple and took no more than 20 minutes. The only thing I would recommend is putting lock tight on the screws holding the pucks on. Luckily I have not had to use them so I cant say if they serve their purpose or not but but I am confident that they will do just fine.
Nice quick and easy install. The frame sliders appear strong but I hope I never have to try them out. With the cost of motorcycle parts these are a relatively inexpensive insurance in case the bike goes down.