Bought this to replace the ratty worn stock hoses on my YZ125 2019, they look good but the kit only comes with 3 new hoses, and most modern 2 stroke carbs have 4 hoses on them plus a very small 5th hose on the underside of the carb. I ended up cutting the longest hose in half to get another hose out of it and it was just barely long enough to work. I had to buy a small hose somewhere else to replace the overflow hose on the underside of carb, at the end of the day it's now all hosed up without too much trouble or disappointment, just know you may need to buy 2 kits to make this work. But a must have for a detailed restoration.
This is the kit you need if need hoses.
This things are awesome fit perfect, look great, and fill really durable!! Will be buying again!
Lets see, several people mentioned they had to buy two kits to make it work, so I purchased two kits. Guess what, some were too short and some were too long. Wouldnt it make more sense to maybe sell in one continuous peice? That way people could cut to length and it would be more universal! you could even charge a buck or so more! maybe add the smaller bottom drain hose? most people have a pair of sizzors or a knife!
One kit was not enough to run OEM length. Does the trick though, fresh lines.
Only comes with 3 tubes. Not 6 like you need these are too short to cut off and use as halves
I bought these because some of the old houses were missing and cracking. Made the bike look good and the carb
Ordered these to dress up and replace old vent hoses on my kx500. They look great and fit snug!
I bought for my Tim 65sx did not fit at all