Excellent product and easy install on my stock husky te 300 bars. Rock solid.

As review states. Even specs states not renthal bars. I have used them before on other bars and they have worked well. They won’t work with renthal Aluminum bars. I wouldn’t recommend them for Aluminum bars.

there is several ways to mount bark busters, but only one Fast Way! this is the finest way to mount bark busters. stays tight. and doesn't spin. you can also remove the bar end and put on a set of new bars. i will never go back to a friction lock style. this is one of the best aftermarket (fix it) products i have ever installed. it is helpful to not thread/tap the throttle side in all the way. leave enough room for the the insert to get tight but leave room for the throttle tube to spin. especially if you cut your bars down. or you will have use a washer to make enough room. this takes a couple mock ups.

Very pleased with the fit and finish of the product.

Easy install and high quality material.

If you've ever dropped the bike and had your hand guards pivot around to the point you couldn't ride until you got the tools out to fix em, you will appreciate the strength of these inserts. The tap gets a little tough cutting near the end but just take it slow. Make sure to use cutting oil and work the tap back in forth to remove burs. Use compressed air to blow out the residue. Also since the inserts are aluminum and the screw is steel, be sure to use some "Never-Seez" or equivalent on the threads since the dissimilar metals will cause corrosion. Another nice feature of the Fasway inserts is that they are easily removable and can be re-used on new bars, unlike other brands of inserts. Definitely two thumbs up.

You want your bars to not move buy these and locktite them in. Done. Solid.

Easy to install. Works great used them for evo advanture bars on 2012 klr650. Go slow with tap and use a lubricant.

If you own the Fastway Hanguard system you will definitely want to pick these up. If you use the wedge system and have ever put the bike down then you know those will get bent easily. This eliminates that ever happening. Easy install, just make sure when you are tapping to take it slow. Half to full turns then thread out to remove any and all burrs from the tapping process so you won't mess the new threads up. A little lubricant like WD40 also helps with the tapping process.