This unit is the perfect redundant system when your rear brake spring breaks on KTM big bikes. High quality.
I've had three of these over the years and when I sell a bike I leave it on because the buyer has tested the bike with it installed. This is a great add on. One caveat because I have big feet (14's) I use two of the springs mated together to add more feel.
Installed on yfz450 and couldnt be happier. Takes out slop and gives good factory feel and tunability. Definetly reccomend!
If you're looking for more resistance, better feel and more control from your rear brake pedal this is the way to go. Product works great for me!
This is a great looking additional to the rear master cylinder. The stock return spring, by itself works but it doesn't give you that positive braking feel. The addition of the Fasst Company return spring gave the pedal that positive break feeling and keeps me from locking up the rear with that soft pedal feel.
This is a must have for anyone looking for that controlled braking.
Adds a little bling helps with the pedal pressure for feel is a nice touch for a brake pedal.
I bought the brake return spring because I am bad about dragging my toe on the rear brake pedal on my 2010 KTM and boiling the brake fluid. I had hoped that this product would add some extra stiffness to the pedal. It did not. It was supposed to be a replacement for the factory spring but was so weak that I left the factory spring on as well but still cant really tell any difference. It did not do what I hoped it would.
This brake return system is a good idea and
definitely improves feel and modulation
when compared to the OE system. The
parts install is easy and straightforward.
If the kit came with instructions, I would
rate it a five star product.