Shopping CartCLOSE
Shop 2020 Riding Gear For Dirt Bike And Street Bike >
Fasst Company Flexx Handlebars - Oversized 1-1/8
Fasst Company Flexx Handlebars - Oversized 1-1/8

$359.99

Item #FSC0006

Read More
9 Reviews
4.8 out of 5 stars
5 Star   7 4 Star   2 3 Star   0 2 Star   0 1 Star   0
All Reviews
Chris Verified Purchaser
1 year 1 month ago warwick n.y.
Great upgrade

One of the best upgrades I have done. The product fit and finish is excellent. I added these to further take the beating off my wrists. They absorb a ton of shock and the only time I can tell they are moving is when I pull up on them to wheelie over stuff. I recommend this for anyone owe rides in rough terrain.

BLosBikes
1 year 10 months ago Harrisburg, PA, USA
Faast Flexx Bars Review

I went out on a limb and bought these bars based on other reviews. They have been on my KDX220R for 5+ years and I love them. I am building a KDX/KX hybrid and am looking for another pair right now. I won't finish my build until I have a pair for my new bike! It is an investment, but well worth it!

DUDE25
1 year 11 months ago Sturgis, KY 42459, USA
Great Product

My Flexx Bars is something I will not go without now that I have used them. So glad I have this top notch set of bars.

Rideorrun Verified Purchaser Top 50
2 years 4 months ago Charleston
Great endurance or mx bars

I put these flex bars on a yfz 450r. I like them but they take some time getting the right feel. Comes with 3 diff bushings from lighter to harder. These bars are kinda rough to get used to but they do absorb alot of shock making for a overall better handling on the atv.

EatsDirt
2 years 5 months ago Gorman, CA 93243, USA
Tuff!

So I've only had these for a handful of rides, they are mounted on Trail Tech Bar Raisers for a Scotts undermount set up. I had a "get off" at about 50mph in sand and was knocked out for over 30 minutes, chest protector saved my life, dislocated my ribs off my sternum....but I bent the bar raisers, and not the bars! Trail Tech said it hasn't happened before with the Steering Stabilizer mounted. I thought I bent the bar end.

Devon
Over 3 years ago San Diego, CA, USA
Worth the money

I have had both hands injured on active duty numerous times. These bars are nothing more than suspension for your hands. If I am riding motocross and its pretty smooth I use the soft elastomers to prevent basically all arm pump, then when I ride trails I change to the yellow for the wash outs, rocks, and so on. By far the best investment you can make when it comes to controls. And there is an abundance of room to mount everything with out the bend of normal bars. Just google what the bend/rise/and width is on the bars you have if its comfortable and compare to the chart.

1hondardr Verified Purchaser
Over 3 years ago Sacramento, CA, USA
Fasst bars

Second set for my two trx 450's, Great bars, great ride.

Waldo Verified Purchaser
Over 3 years ago

Cobracary Verified Purchaser
Over 4 years ago Menifee ca
No More Pain

I Had Wrist surgery 2- years ago and recently it started bothering me a gain. Ive always see these bars but the price was keeping me from buying them. At first it feels funny that the bars are moving so much. Just ride the bike and you stop noticing it after a bit. After riding at the track 3 times the pain in the wrist was much less. But i didn't notice the "no arm pump" in fact i think it was more,but i might be holding on tighter its just getting use to the bars moving. I think it was worth the money.
BTY you don't have to get the special hand guards to mount on.

17 Questions
Answered:   17
Not Yet:   0
Dakota
Q: Will the Odi lock on grips fit the oversized flex bars? Does the bar taper to 7/8 at the ends?
2 months 28 days ago
DaveGearhead
Top 1
2 months 28 days ago
A: They will work on your bars. If your have knurling on the grip portion of your bars you many need to file them smooth prior to installation of the grips.
NYTony
Q: What hand guards will fit on these bars?
4 months 14 days ago
Trevor Gearhead
Top 10
4 months 14 days ago
A: Hand guards are universal for the most part and more personal preference on how they mount. Just make sure whatever you get they are made for 1 1/8 in bars.
mike
Q: If i crash and bend the bars did i just eat 360 bucks.
Over 8 months ago
Dan Gearhead
Top 25
Over 8 months ago
A: Depending on what is damaged/bent, Fasst may be able to help you in sourcing some replacement parts depending on the year make and model of bike you have. They can be reached via Telephone (877) 306-1801, (435) 674-8533
Jackl1
Q: What size will fit a 2017 Honda TRX250X? And will I need any other parts as well
1 year 3 months ago
Motoexpert
Top 25
1 year 3 months ago
A: They only offer the in oversized which is 1 1/8" so you would need the clamps also. They offer them in a kit which can be found at the link listed below.
https://www.motosport.com/turner-performance-products-oversized-bar-mounts-with-fasst-flexx-handlebar-combo
Devon
Q: Bends
Over 3 years ago
I am going to order these for my atv. I want the 14 degree atv but on the fast co website you can get a low version or the regular version that will have the bars a little higher. How do I order the taller version off your website if all that it says is 14 degree atv?
Devon
Over 3 years ago
A: I will answer my own question. According to Fasst co website they have quad racer and quad racer low. If you order from here it will be the taller bar. If you need the quad racer low I am sure you can call to place your order to get the right bars. Make it easy for customer service and go to Fasst Co website and get the part number for the bars you want and give it to motosport customer service when you call.
Betty
Q: I am 6' 5" and ride a 2015 BMW R1200GSA. What Flexx Handlebars should I order.
Over 3 years ago
MotoSportExpert
MotoSport Staff Expert
Over 3 years ago
A: Handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. There are riders at 6'5" that run stock bar height, seat height and settings. There are also shorter riders who prefer taller bars and seat. I would recommend looking at the Size Chart for the measurement dimensions of each of the handlebar bends. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
trevor
Q: Bar bends
Over 3 years ago
it says flex bars come in 12 degree or 14 degree whats that meen? I like my bars to bend up no lay flat
MotoSportExpert
MotoSport Staff Expert
Over 3 years ago
A: Please see the sizing chart tab for the Fasst Flexx Handlebar measurements.
CaspersSVT
Q: New Handlebars Help, "NEEDED", For 2016 Kawasaki KX100.
Over 3 years ago
Ok Hey, I NEED Some Help/Advice Finding The BEST Fit For My Kawi KX100. OPINIONS DO MATTER, Explanations are Even Better, LoL! 1: What Size Would Be MOST Recommended For My Stock 2016 Kawasaki KX100? 2: Secondly, Would It Be Best Going With, a, "Stock" Size or Something Else, Another Setup. 3: What Is Everything That I Am Going To BOTH Need and Want For These Bars To Work At Their Highest Potential. 4: I Ride About 100 - 150cc 2-Stroke Dirt Bikes. I DO NOT Race, Yet, And This Is Why I Am So Desperate In Asking, Y'all. So, Thanks Guys and Gals, Much Appreciated. Christopher Connors.
MotoSportExpert
MotoSport Staff Expert
Over 3 years ago
A: Handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends. These bars do Require the use of oversized 1-1/8" handlebar clamps. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Roach
Fasst Company Flexx Handlebars - Oversized 1-1/8
Fasst Company Flexx Handlebars - Oversized 1-1/8
Fasst Company Flexx Handlebars - Oversized 1-1/8
Q: Best bend closest to stock ???
Over 3 years ago
Whats the handle bar bend closest to stock , I currently have a 2012 TRX450 Er and I'm interested in purchasing these handle bars but I've become accustomed to the stock bend so I'm looking to get the same degree on these if you can give me some advice I would appreciate it I've purchased many parts from you guys and never a problem .... Thank you in advance JT
MotoSportExpert
Expert MotoSport Staff
Over 3 years ago
A: Unfortunately we do not have specs for every handlebar. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Vinnie5OO
Fasst Company Flexx Handlebars - Oversized 1-1/8
Q: Will these bars work with my BRP sub mount with a Scott's steering damper? I also has the integrated bark buster mount.
Over 4 years ago
MotoSportExpert
MotoSport Staff Expert
Over 4 years ago
A: Fitment can not be guaranteed with that combination as we have not tried every set up. I would contact Fasstco directly to see if they have any experience with a similar set up.
(877) 306-1801
http://www.fasstco.com/contact
1 - 10 of 17
# Part Numbers
Product Variant Manufacturer Part #
12 Degree / Minicycle FL-1002-12-29
12 Degree / Motorcycle FL-1001-12-32
12 Degree / ATV FL-1003-12-31
14 Degree / Motorcycle FL-1001-14-32
14 Degree / ATV FL-1003-14-31
Added to your cart
CLOSE