Shopping CartCLOSE
  • Your cart is empty.
EBC X Series Carbon Brake Pads
EBC X Series Carbon Brake Pads

$21.85 - $33.25
5% Off - Save up to $1.70

Select your bike to see if this brake pad fits
Item #EBC0006

Read More
67 Reviews
4.2 out of 5 stars
5 Star   39 4 Star   18 3 Star   3 2 Star   0 1 Star   7
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Verified Purchaser
Indianapolis
Durability 3/5 Ease of Installation 5/5 Performance 5/5 Style 5/5
Fantastic brakes

Been riding these since I started riding for Motorsport.com. These brakes are terrific for every condition except super muddy high speed races. I’ve burned threw a brand new set in a single race on 3 occasions.

These really are amazing brakes in any other conditions!

Verified Purchaser
Washington
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 4/5

EBC Brakes pads fit and work well. I recommend draining the factory brake fluid and replacing it with EBC Hi Performance Brake Fluid while you are installing brake pads. It is amazing the difference a simple pad and fluid change will make on your stopping power.

Durability 1/5 Ease of Installation 1/5 Performance 1/5 Style 1/5
Terrible pads

I put these on a supermini I built with an oversized front ebc rotor and new rear rotor. The brakes were terrible from the first ride to the 6th. I put the old worn out pads that I replaced on and the stopping power tripled. I will never buy ebc pads again.

MotoSport Staff Expert
Portland, OR, USA
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 5/5
The brand says it all!!!

I installed these brake pads on a 01' cr250 with ease. I have been using EB products for over 2 decades with nothing but great results. NOTE these are not for wet conditions but will work if in a pinch.

Verified Purchaser
Pennsylvania
Durability 1/5 Ease of Installation 5/5 Performance 3/5 Style 4/5
Only lasted three rides

I put these pads in right before I went to Hatfield McCoy. It was really muddy there. These pads did bite better than the standard set in my front, but were Totally smoked after three rides and I do not drag my brakes.

Verified Purchaser
Fort Worth, TX, USA
Ease of Installation 5/5 Performance 5/5 Style 4/5
Good pads

I replaced my TTR 125 brake pads with these and noticed nice jump in braking performance over the stock pads. Recommended.

Top 500
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 5/5
Work great

Work great, fit perfect. Easy to install

Verified Purchaser
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 5/5

Expert MotoSport Staff Verified Purchaser
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 5/5
Great pads

These pads work great, a big step up from what I was running

Verified Purchaser
Pensacola, FL, USA
Durability 3/5 Ease of Installation 5/5 Performance 3/5 Style 5/5
Needed brake pads

Fit like oem, no problems installing. Very quick shipping. This company has it together.

See 10 More Reviews
10 Questions
Answered:   10
Not Yet:   0
Cheech3
Q: I accidentally ordered rear pads for a 2002 and mine is a 2001 cr250. Do pads from 2002+ fit on 2001?
3 months 7 days ago
DaveGearhead
Top 10
3 months 7 days ago
A: The two years of bikes listed do not use the same part numbers for the rear pads.
Jdigga04
Q: I just bought a trail blazer so would these fit the rear of a 97 trail blazer also?
3 months 16 days ago
JamesGearhead
Top 10
3 months 16 days ago
A: No, these are for motorcycles only. Motosport does not sell automobile parts.
Andy
Q: I need rear brake pads for my 97 Yamaha blaster will these work?
2 years 4 months ago
MotoSportExpert
MotoSport Staff Expert
2 years 4 months ago
A: Yes. Just be sure to correctly select the Year/Make/Model of your ATV before ordering so we can be sure to send you the correct pads for your ATV. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Skaarj
Q: Front or rear
2 years 6 months ago
if i remember there is no difference between front or rear pads for polaris predator 500. if I right i can order 3pcs for my vehicle without difference front or rear
MotoSportExpert
Expert MotoSport Staff
2 years 6 months ago
A: Yes the same pad would be used (FA159X) front and rear on your 2004 Polaris Preadator 500.
Codymiester
Q: How do these handle let's say Washington winter weather?
Over 3 years ago
It did say these are awesome pads for hot dry weather. Mao do these not like water or mud
Dirtschmobn
Over 3 years ago
A: You shouldn't have a significant problem with these pads in wet muddy weather vs dry. A sintered pad offers more bit on the rotor, so that would be a better bet if you're concerned about performance.
Typically, riders and mechanics elect to use a solid rotor for very muddy rides vs the slotted rotors (stock) to diminish the possibility of contaminants reaching the pad surface and offer more surface area to dissipate the moisture.
MotoSportExpert
Expert MotoSport Staff
Over 3 years ago
A: For mud, sand and wet conditions the EBC R Series Sintered Brake Pads are recommended.
The EBC "X" Series brake pads are ideal for hot dry conditions. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
warriorTako
Over 3 years ago
A: They should work great. The carbon series should hold regardless of temperature. Within reason. Im possitive that they will perform just as well as any pads out there. I ran mine through the snow, and i felt no difference. hope this helps
TheHareScrambler
Over 3 years ago
A: it has been my experience carbon pads work fine in ice and snow. however the mud will cause them to wear very fast. carbon pads cool very well. so if you splash a creek the first stop may have poor feed back feel.
SpeedDeamon78
Q: Will these pads work on a 2001 Honda cr125?
Over 3 years ago
MotoSportExpert
Expert MotoSport Staff
Over 3 years ago
A: Yes. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct pads for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Dirtschmobn
Over 3 years ago
A: If EBC and MotoSport say they fit you should be good to go. If you do not trust the site, you can ask Motosport customer service to verify part numbers for you.
I've used EBC pads on many bikes for many years without fitment problems. Also, your '01 CR125 shares very common calipers (Front & Rear) with many Honda mx models, so you shouldn't have an issue.
Kawikid17
Q: Hey i orderd thees brakes a while ago but im worried they wont fit my bike wich is a 1991kx 80
Over 4 years ago
I purshased i front and rear set of brakes wich came in red and i want to make sure they with fit my 1991 kx 80.
MotoSportRyanT
Expert MotoSport Staff
Over 4 years ago
A: I would need to know the specific part number you received to tell you if they are correct for your bike or not. As long as you correctly selected your 1991 Kawasaki KX80 as the bike you were shopping for when you ordered the pads they should be correct for your bike. I would say the easiest way for you to tell would be to remove the pads that are on your bike now and compare the brake pad shape to make sure they are the same. Also, alot of EBC pads are coated with red on the backing plate of the pad, the image shown online is for reference only and is likely not displaying the exact brake pads for your bike. If you do need to exchange the pads you received please feel free to give us a call at 888-676-8853.
cannon
Q: Hi,can you please tell me if these pads will fit a cr 250,year 2000 and i would also need to know the thickness. thanks
Over 4 years ago
MotoSportRyanT
MotoSport Staff Expert
Over 4 years ago
A: Yes, the EBC "X" Series Pads would be made to fit your 2000 Honda CR250R. The pad thickness for the pads for your bike is approximately 10.5mm per pad.
Butthead123
Q: How many
Over 9 years ago
How many comes with this one or two
james718
MotoSport Staff Expert
Over 9 years ago
A: These are sold per caliper.
howhardisit2makeupaname
Over 9 years ago
A: 2
BryceHarlow
Q: How many come in the package?
Over 10 years ago
Do I need to order two sets to do a complete brake job on the front?
Drewski
MotoSport Staff
Over 10 years ago
A: If you are working on a ATV or Streetbike that requires two sets you will want to order 2 sets of pads since they are sold per caliper.
Fitment
See all bikes that this part fits...
See Fitments
# Part Numbers
Product Variant Manufacturer Part #
Front FA135X
Rear FA155X
Front FA83X
Rear FA83X
Front FA119X
Front FA125X
Front FA128X
Rear FA131X
Rear FA137X
Rear FA152X
Rear FA159X
Front FA159X
Front FA181X
Front FA185X
Rear FA208X
Front FA230X
Front FA258X
Front FA302X
Front Right FA135X
Front Left FA165X
Front FA54X
Rear FA317X
Rear FA346X
Rear FA367X
Rear FA368X
Rear FA401X
Rear FA54X
Front FA84X
Rear FA84X
Front FA450X
Front FA130X
Rear FA181X
Front FA452X
Front FA475X
Front Left FA642X
Front Right FA645X
Rear FA452X
Rear FA475X
Rear Left FA674X
Rear Right FA675X