Working like an anti-sway bar on a race car, the DuraBlue Anti-Sway Bar* is fully adjustable from soft to stiff...you can even adjust one side stiff and the other soft to match specific race conditions! Full brushed and chrome plated, it fits all A-Arm ATV's. If you're looking for "flatter cornering" a DuraBlue Anti-Sway Bar is the answer.
The DuraBlue Anti-Sway Bar is a unique part designed to be custom tailored for your machine. This customizing is accomplished by utilizing mounting brackets, which can be located on the mounting tube in any location, then clamped. The clamps can be installed with the tube forward or back (relative to the mounting surface). The clamps can also be bent at the mounting face, moving the sway bar tube slightly to provide frame and component clearance as necessary. The link arm (the part that goes from the torsion bar to the down link) can be installed with either an inner offset or outer offset (you can accomplish this by flipping the arm over and reinstalling it on the spline of the torsion bar). The upper heim joint can be bolted to the inside or outside of the link arm. The lower heim joint can be mounted to the forward side or rearward side of the shock mounting bracket.
- Fits all A-Arm ATV's.
- Increases ATV stability and safety for everyday riding.
- A must have for flat track racing.
- Reduces front end wheel hopping on fast turns.
- Stabilizes and reduces tipping action when cornering.
- Independently adjustable on each side from soft to stiff.
Each machine will be slightly different. You will want to make sure that you run the suspension through its full travel to make sure there is no binding or rubbing of any parts. This assembly is very flexible and can be adjusted to fit nearly every application.
