Being vertically challenged I needed to lower a newly purchased 2008 DR650, the answer was the Dog Bones that gave me 1.75" in the rear, I then lowered the front the same amount. Excellent quality, easy to install and perfect results.
This is perfect for anyone who is a little too short for their bike. It lowered our '08 CRF150F about 1 to 1.5 inches. If that isn't enough for you, it pairs nicely with sliding the forks up in the triple clamp.
came with everything, fit great but lowered bike close to half inch.
Did exactly what is says it does lowers it the perfect amount for me. I’m 5’6 and wasn’t able to touch two feet at the same time now I can touch both sides. Great price and only about 10 minutes to install
This kit was money spent well! before i had to side straddle my bike at stops so it was uncomfortable and i hesitated to go on the trails. Now that i have lowered its so much more comfortable to ride and i have much more confidence on my bike. 5 star review!!
Very pleased with Devol lowering link, a bit expensive, but it did lower my CRF450R a good inch.
I'm 52 yrs old, 5'7", weight is 195 lbs. My legs are short and I ride a 2008 Suzuki RMZ250 in the IXCR cross country series. I have always had trouble touching the ground when on my bike. I've cut down the seat foam and now added this awesome Devol lowering link. It did just what is says it will. It lowers the rear of the bike around 1-1 1/2" without hardly throwing off your geometry. You do, however, need to lower your forks in the triple trees the same amount of distance the rear gets lowered in order to keep the chassis balance properly. That's simply loosening your pinch bolts, sliding the forks up around an 1" and retightening. My kit came with new needle bearings, seals, center spacer and retainers already installed. I did take it apart and grease it very heavily since I race woods and typically get in water and deep mud. The other thing to remember whenever messing with the rear suspension is to RESET YOUR SAG! Most people overlook this so please find out how to do it, it's simple also, ,and do it. Overall, this took about 10 mins to install and another 5mins to adjust the sag then BOOM...I was riding. It now allows me and my short legs to touch the ground and now hopely I won't struggle so much in a woods race when I need to put my feet down for balance. Excellent fit and finish and it did just what I needed it to do.
The Devol lowering link worked out good it lowered my KLX 250 where it will work for my 5"6" inseam I do not have to do any other mods to my bike. The picture shows the needle bearings but they do not come with the kit you only get the dog bone arms. Make sure your final plate has started on the shoulder bolt before you start to tighten up any bolts of nuts.
I am very happy with the high quality finish and it was very easy to install, the instructions were easy to follow and I was riding in about 20 minutes
We are based in the US. Suzuki-USA provides us with parts, parts lists, and information only for models which Suzuki sells in the US. Here in the US, Suzuki offers the GSXR models in 600cc, 750cc, and 1000cc versions.
We don't know if this item might fit your bike.