The MotoSport.com Custom Dynamics TruBEAM Halo Dual 5.75in Headlights With Dual Hi/Lo Ring Kit includes ONE Custom Dynamics TruBEAM Halo Dual 5.75 Inch LED Headlight and TWO Custom Dynamics High & Low Beam Halo LED Headlight Adapters for a complete install, each with the following features:
Custom Dynamics TruBEAM Halo Dual 5.75 Inch LED Headlight:
Custom Dynamics TruBEAM Headlamp is our premium 5.75" Oval LED Headlamps are designed for plug-and-play installation on 2004 - 2013 Harley-Davidson Road Glide models. The complex reflector design features three low beam LEDs and two high beam LEDs (per headlight) with a combination of projector and reflector type LEDs and built in DRL halo rings. This combination provides superior low and high beam outputs. No additional trim ring needed. Available in your choice of Chrome or Black Chrome reflector. DOT and SAE Compliant. Lifetime warranty against LED failure.
- 5800K color temp.
- 1.1A low current draw, 1.5A high current draw , 0.2A Halo ring current draw.
- Three low beam LEDs, two high beam LEDs.
- Operating temp. range -40C - 85C.
- 5.75" diameter.
- Input voltage: 9V - 32V.
- IP68 rating.
- Projector and reflector type LEDs.
- Plug-and-play H4 connector.
- Built-in DRL Halo.
- Chrome or black chrome reflector.
- DOT and SAE Compliant.
- Lifetime LED warranty.
- Sold as a pair.
- Notes: Custom Dynamics plug and play High & Low Beam Halo LED Headlight Adapters (quantity 2) are required to enable internal DRL halo rings. In addition, this adapter will keep the center headlight low beam on when the high beam is activated to provide maximum light output (in combo).
(TWO) Custom Dynamics High & Low Beam Halo LED Headlight Adapter:
High-Lo-Halo adapter is required to enable the built in Halo ring of the Custom Dynamics TruBEAM LED Headlamp when connection is not already present. In addition, this adapter will keep the center headlamp low beam on when the high beam is activated to provide maximum light output.
- Keeps high and low beams on at same time.
- Enables built-in LED Halo ring.
- Plug -and-play H4 or Posi-Lock connector.
- 8.5" / 9.5" wire lead.
