Applied

Applied R/S Triple Clamp Kit With Renthal Twinwall Handlebar Combo

Renthal Twinwall Handlebar - Carmichael High - 360

12% Off - Save up to $37.99

2 Reviews
2 Questions

It appears you may have javascript turned off in your web browser, or are using a browser that does not support javascript. You must enable javascript to use our site. For questions call us at 1-888-676-8853.

Select your bike to see if this clamp/bar combo fits

Dirt Bike

Clear / Select New Bike Manage Saved Bikes Browse Dirt Bike Makes

Or, select from the list of bikes that fit this product

Quantity

Item #APP001C

The MotoSport.com Applied R/S Triple Clamp Kit With Renthal Twinwall Handlebar Combo includes one each of the following:

Applied R/S Triple Clamp Kit With Oversized Bar Mounts:

The new RS line is unlike any on the market today. The rubber / solid design is the best of both worlds.

Superior system to the previous conical-shaped bushings.
Proprietary urethane elastomer bushings provide excellent vibration damping characteristics; this strong and abrasion-resistant formula withstands over 2200 PSI.
The elastomer bushings are contained in machined pockets on the top clamp, then precision machined.
Stainless steel collars are inserted into the elastomer bushings providing a mechanical restraint while still isolating the bar mounts from vibration.
The bar mount is then secured with a strong grade 10.9 bolt.
The proper torque secures the bar mount and pre-loads the elastomer bushings; pre-load ensures the bushings completely fill the pockets and isolate the bar mounts.
Also included in the kit is a set of 6061 aluminum bushings; these precision-machined solid bushings fit into the pockets in place of the elastomer bushings and create a solid mount system.
For oversized bars.
Feature offset mounting holes for adjusting handlebar location.
Top it off with the included one-piece bar clamp to tie both mounts together and you have a twist-free rubber or solid system.
Includes R/S top triple clamp, elastomer and solid bushings, bar mounts, one-piece bar clamp, and hardware.
Made in the U.S.A.
Note: Clamp has same offset and height as O.E.M.

Renthal Twinwall Handlebars - Oversized 1-1/8":

Renthal Twin Wall Handlebars benefit from immense strength, resilience and are virtually guaranteed against fatigue failure due to their design.
Renthal Twin Wall Handlebars are essentially two bars in one and Renthal's over-engineering means they could be the last set of bars you buy for your bike.
Unlikely to bend except in severe crashes.
Specifically designed for MX and Supercross.
1-1/8" (28.6 mm) diameter, double-walled aluminum alloy handlebar.

Report Incorrect Product Information

5 out of 5 stars

5 Star 2 4 Star 0 3 Star 0 2 Star 0 1 Star 0

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500

Dirty Verified Purchaser

Over 6 months ago Nikiski, AK 99611, USA

Triple clamps

2001 cr 250 excellent product easy to install the urethane bushings dampened the vibration.

FlyingHigh Verified Purchaser Top 250

Over 4 years ago Menifee, CA, USA

Awesome Renthal Bars

Love these bars. They are a perfect bend. Thanks..

Answered: 2

Not Yet: 0

Ask a question

Dirtrider97

Q: Will this top clamp work with a stock bottom clamp?

Over 3 years ago

With this top clamp having a 22mm offset will it work with my stock lower clamp or will I need to purchase a matching 22mm lower clamp?

Answer this Question

MotoSportExpert

Expert MotoSport Staff

Over 3 years ago

A: For your 2012 Kawasaki KX250F this clamp (6271) would be the stock offset and work with your stock bottom clamp. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.

sticecube

Q: Will this move the front number plate mounting screw?

Over 3 years ago

Im in the marked to buy a 2002 cr250 but i want to know if this clamp will move the mounting bolt to the top of the clamp instead of the front like what is stock. I want to know before i buy because i want to put a 13 450 front numberplate on the bike and those mount through the top.

Answer this Question

MotoSportExpert

Expert MotoSport Staff

Over 3 years ago

A: No it would have the same front mounting location as the stock 2002 Honda CR250.

RENTHAL HANDLEBARS

Dirt 7/8"
Dirt Twinwall
Dirt Fatbar
Street 7/8"
Measurement Diagram

7/8"

Model	Width	Height	Rise	Clamp Area Width	Sweep	Control Length
607 - Raptor 660	31.1in (790mm)	5.55in (141mm)	4.33in (110mm)	3.15in (80mm)	3.82in (97mm)	9.49in (241mm)
611 - XR100 / TTR125	29.13in (740mm)	5.94in (151mm)	4.65in (118mm)	4.72in (120mm)	2.64in (67mm)	7.48in (190mm)
615 - TRX250R	30.39in (772mm)	7.05in (179mm)	4.33in (110mm)	4.53in (115mm)	3.5in (89mm)	8.07in (205mm)
636 - Banshee	30.79in (782mm)	6.38in (162mm)	4.33in (110mm)	4.33in (110mm)	3.66in (93mm)	7.87in (200mm)
666 - Desert/Vintage	33.46in (850mm)	4.69in (119mm)	3.23in (82mm)	5.51in (140mm)	2.91in (74mm)	7.76in (197mm)
677 - Quadracer	30.39in (772mm)	4.84in (123mm)	4.33in (110mm)	4.72in (120mm)	3.7in (94mm)	7.48in (190mm)
717 - CR80	29.41in (747mm)	3.78in (96mm)	3.46in (88mm)	3.74in (95mm)	2.76in (70mm)	6.89in (175mm)
722 - CR High	31.5in (800mm)	3.74in (95mm)	2.64in (67mm)	4.92in (125mm)	2.48in (63mm)	7.68in (195mm)
757 - Mini High	31.57in (802mm)	5.2in (132mm)	4.69in (119mm)	3.54in (90mm)	2.4in (61mm)	6.97in (177mm)
759 - RM125/250 96-01	31.69in (805mm)	2.83in (72mm)	1.97in (50mm)	5.31in (135mm)	2.56in (65mm)	8.15in (207mm)
764 - Jimmy Button	32.05in (814mm)	4.37in (111mm)	3.19in (81mm)	4.72in (120mm)	2.68in (68mm)	7.99in (203mm)
773 - CR Mid	31.54in (801mm)	3.46in (88mm)	1.97in (50mm)	5.12in (130mm)	2.24in (57mm)	8.31in (211mm)
780 - KX80/85/100 98-12	29.02in (737mm)	3.98in (101mm)	3.35in (85mm)	3.74in (95mm)	2.64in (67mm)	6.81in (173mm)
781 - ATV Race	31.97in (812mm)	5.87in (149mm)	3.78in (96mm)	4.92in (125mm)	2.99in (76mm)	9.02in (229mm)
783 - Mini Race R (65 cc)	29.06in (738mm)	4.61in (117mm)	3.43in (87mm)	3.74in (95mm)	2.09in (53mm)	6.81in (173mm)
784 - RC Mini / Alessi	29.21in (742mm)	4.69in (119mm)	3.39in (86mm)	3.74in (95mm)	1.61in (41mm)	6.89in (175mm)
787 - 400EX	31.3in (795mm)	5.63in (143mm)	4.21in (107mm)	4.72in (120mm)	3.62in (92mm)	8.66in (220mm)
790 - CR Low/RM125/250 05	31.61in (803mm)	3.23in (82mm)	2.09in (53mm)	5.31in (135mm)	2.24in (57mm)	7.95in (202mm)
791 - RM85 02-09	28.94in (735mm)	3.62in (92mm)	2.91in (74mm)	3.94in (100mm)	2.64in (67mm)	7.52in (191mm)
794 - YFZ450 ATV 04-05	30.43in (773mm)	4.29in (109mm)	3.62in (92mm)	4.13in (105mm)	3.78in (96mm)	8.82in (224mm)
797 - 50cc Play Bike	28.15in (715mm)	7.72in (196mm)	7.48in (190mm)	2.36in (60mm)	1.65in (42mm)	6.22in (158mm)
798 - KTM 85SX	30.51in (775mm)	3.62in (92mm)	2.52in (64mm)	4.53in (115mm)	1.93in (49mm)	7.72in (196mm)
799 - CRF150F/230F	30.51in (775mm)	4.53in (115mm)	3.35in (85mm)	5.31in (135mm)	1.69in (43mm)	6.81in (173mm)
810 - YFZ450 ATV 06	30.71in (780mm)	4.17in (106mm)	2.72in (69mm)	4.13in (105mm)	3.46in (88mm)	8.78in (223mm)
811 - Raptor 700	31.1in (790mm)	5.59in (142mm)	4.41in (112mm)	4.72in (120mm)	3.54in (90mm)	8.27in (210mm)
815 - LTR450	31.65in (804mm)	3.54in (90mm)	3.07in (78mm)	3.94in (100mm)	3.15in (80mm)	9.33in (237mm)
816 - CRF150R Adult Bar	30.83in (783mm)	5.39in (137mm)	3.98in (101mm)	4.92in (125mm)	1.73in (44mm)	7.01in (178mm)
821 - Short/McGrath	32.01in (813mm)	3.07in (78mm)	1.65in (42mm)	5.91in (150mm)	2.13in (54mm)	7.87in (200mm)
823 - KTM 65SX 12-13	29.29in (744mm)	3.15in (80mm)	2.83in (72mm)	4.33in (110mm)	1.97in (50mm)	7.09in (180mm)
966 - McGrath	31.77in (807mm)	3.46in (88mm)	2.4in (61mm)	5.31in (135mm)	2.36in (60mm)	7.99in (203mm)
966 - YZ / Henry	31.77in (807mm)	3.46in (88mm)	2.4in (61mm)	5.31in (135mm)	2.36in (60mm)	7.99in (203mm)
971 - Carmichael	31.57in (802mm)	3.82in (97mm)	2.44in (62mm)	5.31in (135mm)	2.09in (53mm)	7.91in (201mm)
983 - Bradshaw	31.81in (808mm)	3.74in (95mm)	2.28in (58mm)	5.51in (140mm)	2.17in (55mm)	8.11in (206mm)

TWINWALL

Model	Width	Height	Rise	Clamp Area Width	Sweep	Control Length
918 - CR High	31.54in (801mm)	3.9in (99mm)	2.64in (67mm)	4.53in (115mm)	2.56in (65mm)	7.56in (192mm)
921 - 06 YZF	32.13in (816mm)	3.35in (85mm)	1.69in (43mm)	3.74in (95mm)	1.61in (41mm)	7.05in (179mm)
922 - Carmichael High	31.97in (812mm)	4.72in (120mm)	3.39in (86mm)	4.53in (115mm)	2.28in (58mm)	7.36in (187mm)
994 - Factory KTM	31.89in (810mm)	3.9in (99mm)	2.76in (70mm)	4.33in (110mm)	1.57in (40mm)	7.68in (195mm)
996 - Stewart	31.93in (811mm)	3.66in (93mm)	2.09in (53mm)	4.33in (110mm)	1.93in (49mm)	7.87in (200mm)
997 - Carmichael	31.65in (804mm)	4.13in (105mm)	2.52in (64mm)	4.33in (110mm)	2.13in (54mm)	7.87in (200mm)
998 - Windham	31.61in (803mm)	3.86in (98mm)	2.72in (69mm)	4.33in (110mm)	2.2in (56mm)	7.48in (190mm)
999 - McGrath	32.01in (813mm)	3.11in (79mm)	1.65in (42mm)	4.92in (125mm)	2.13in (54mm)	7.87in (200mm)

FATBAR

Model	Width	Height	Rise	Clamp Area Width	Sweep	Control Length
602 - YZ/YZF 07+	31.54in (801mm)	3.5in (89mm)	2.32in (59mm)	4.92in (125mm)	2.2in (56mm)	7.6in (193mm)
603 - McGrath	31.5in (800mm)	3.86in (98mm)	2.91in (74mm)	3.94in (100mm)	2.17in (55mm)	7.36in (187mm)
604 - Carmichael	31.65in (804mm)	4.09in (104mm)	2.52in (64mm)	4.13in (105mm)	2.13in (54mm)	7.4in (188mm)
605 - CR High	31.69in (805mm)	3.82in (97mm)	2.52in (64mm)	4.53in (115mm)	2.56in (65mm)	7.87in (200mm)
609 - RC High	31.57in (802mm)	4.72in (120mm)	3.31in (84mm)	4.13in (105mm)	2.2in (56mm)	7.48in (190mm)
671 - RC Mini	29.69in (754mm)	4.41in (112mm)	3.03in (77mm)	3.35in (85mm)	2.05in (52mm)	6.97in (177mm)
672 - CR / MX Low	31.73in (806mm)	3.35in (85mm)	2.01in (51mm)	4.92in (125mm)	2.2in (56mm)	7.48in (190mm)
745 - Enduro	30.75in (781mm)	4.02in (102mm)	2.68in (68mm)	4.53in (115mm)	2.13in (54mm)	7.44in (189mm)
821 - Short/McGrath	32.01in (813mm)	3.07in (78mm)	1.65in (42mm)	5.91in (150mm)	2.13in (54mm)	7.87in (200mm)
822 - KTM Low	31.81in (808mm)	3.27in (83mm)	2.09in (53mm)	5.51in (140mm)	1.61in (41mm)	7.87in (200mm)
826 - KTM High	31.69in (805mm)	3.74in (95mm)	2.68in (68mm)	5.12in (130mm)	1.65in (42mm)	7.09in (180mm)
827 - KTM SX 125-450 13	31.93in (811mm)	3.62in (92mm)	2.05in (52mm)	4.61in (117mm)	2.05in (52mm)	8.74in (222mm)
828 - Street Low	30.16in (766mm)	3.15in (80mm)	1.97in (50mm)	4.8in (122mm)	1.97in (50mm)	7.48in (190mm)

Street 7/8"

Model	Width	Height	Rise	Clamp Area Width	Sweep	Control Length
754 - Low	28.98in (736mm)	4.29in (109mm)	2.48in (63mm)	4.13in (105mm)	4.69in (119mm)	9.53in (242mm)
755 - Medium	28.86in (733mm)	4.65in (118mm)	3.07in (78mm)	4.13in (105mm)	4.09in (104mm)	8.78in (223mm)
756 - High	28.19in (716mm)	4.76in (121mm)	3.78in (96mm)	4.13in (105mm)	3.98in (101mm)	7.87in (200mm)
758 - Ultra Low	28.86in (733mm)	2.91in (74mm)	1.65in (42mm)	4.33in (110mm)	3.7in (94mm)	9.13in (232mm)
789 - Street Fighter	29.88in (759mm)	3.98in (101mm)	2.28in (58mm)	4.53in (115mm)	3.11in (79mm)	7.64in (194mm)

See all bikes that this part fits...

See Fitments

Clamp Kit

Product Variant	Manufacturer Part #
Red / 24mm	N/A
Red / No Offset	N/A
Red / 22.5mm	N/A
Red / 22mm	N/A
Silver / 22mm	N/A
Red / No Offset	N/A
Black / 23.5mm	N/A
Silver / 23.5mm	N/A
Black / 20mm	N/A
Black / No Offset	N/A
Black / 25mm	N/A
Black / 25mm	N/A
Black / 25mm	N/A
Silver / 25mm	N/A
Black / 22.5mm	N/A
Silver / 20mm	N/A
Black / 21.5mm	N/A
Silver / 21.5mm	N/A
Black / 22mm	N/A
Silver / No Offset	N/A
Black / 22mm	N/A
Red / 23.5mm	N/A
Black / 24mm	N/A
Red / 21.5mm	N/A
Black / No Offset	N/A
Red / 22mm	N/A
Black / No Offset	N/A
Red / No Offset	N/A
Red / 22mm	N/A
Silver / 25mm	N/A
Red / 22mm	N/A
Silver / 25mm	N/A
Red / 25mm	N/A
Silver / No Offset	N/A
Red / 25mm	N/A
Black / 22mm	N/A
Red / 25mm	N/A
Silver / 22mm	N/A
Red / 20mm	N/A
Silver / 24mm	N/A
Silver / 22.5mm	N/A
Black / 22mm	N/A

Handlebar

Product Variant	Manufacturer Part #
Black / 998 - Windham	998-01-BK-02-185
Silver / 996 - Stewart	996-01-TG-
Green / 997 - Carmichael	997-01-GN-02-185
Silver / 998 - Windham	998-01-TG-02-185
Silver / 997 - Carmichael	997-01-TG-02-185
Red / 918 - CR High	918-01-RD-02-185
Red / 999 - McGrath	999-01-RD-07-185
Black / 994 - Factory KTM	99401BK
Blue / 922 - Carmichael High	922-01-BU-07-184
Black / 996 - Stewart	996-01-BK-07-185
Black / 999 - McGrath	999-01-BK-07-185
Black / 918 - CR High	918-01-BK-02-185
Black / 997 - Carmichael	997-01-BK-02-185
Black / 921 - 06 YZF Bend	921-01-BK-07-185
Red / 998 - Windham	998-01-RD-02-185
Blue / 998 - Windham	998-01-BU-02-184
Red / 997 - Carmichael	997-01-RD-02-185
Blue / 921 - 06 YZF Bend	921-01-BU-07-184
Red / 996 - Stewart	996-01-RD-07-185
Blue / 997 - Carmichael	997-01-BU-02-184
Silver / 922 - Carmichael High	922-01-TG-07-184
Blue / 918 - CR High	918-01-BU-02-184
Silver / 921 - 06 YZF Bend	921-01-TG-07-185
Blue / 996 - Stewart	996-01-BU-07-184
Silver / 918 - CR High	918-01-TG-02-185
Blue / 999 - McGrath	999-01-BU-07-184
Silver / 999 - McGrath	999-01-TG-07-185
Red / 922 - Carmichael High	922-01-RD-07-185
Green / 996 - Stewart	996-01-GN-07-185
Black / 922 - Carmichael High	922-01-BK-07-185

Applied R/S Triple Clamp Kit With Renthal Twinwall Handlebar Combo

Find More