Loved by racers worldwide, the Accossato 16x18 radial clutch master cylinder for sportbikes feature a folding, standard length or a fixed, standard length RST lever, both with anti-drag inlet hole. The forged aluminum cylinder is stronger and lighter than stock cast units for maximum reliability. Accossato has been producing Italian made sportbike components for original and aftermarket use since 1969.
This hydraulic clutch master uses a 16 mm diameter piston and an upgraded racer's folding, standard length or a fixed, standard length RST lever which features an anti-drag inlet hole machined into the lever end for the passage of air at high speed.
Accossato produces race-quality clutch master cylinders and braking components using a 100% quality-control process mandating all core components to be inspected under a microscope before assembly, pressure calibrated, and vacuum tested upon final assembly.
- Folding \ fixed lever: 16 mm x 18 mm.
- Material: Pressure-forged aluminum.
- Piston: 16 mm.
- Surface protection: Anodized.
- Exclusive Three (3) year limited U.S.A. warranty.
Items Required to Complete Installation:
- Accossato suggests using the Accossato 15 ml Clutch Reservoir Mounting Kit (P/N ACC-KITVP; sold separately) as it includes a reservoir, bracket, hardware and tubing.
- The clutch master kit includes a single hole banjo bolt with two copper washers.
- If you wish to retain the clutch micro-switch functionality, you will require a Single Hole Inline Pressure Switch, Banjo Bolt (P/N: ACC-ID001; sold separately).
- If you intend to use your stock reservoir you will require a length of 6 mm Tygon 2375 Tubing and 2-3/8" Spring Clamps (all sold separately).
- Dot 4 Brake fluid will be needed. Accossato suggests replacing all of the fluid in the system when you install the master.
- Note: Do NOT use Dot 5.1.
