Pro Moto Billet Kick-It Kick Stand
Pro Moto Billet Kick-It Kick Stand

$149.99 - $169.95

Item #PMB0003

Read More
120 Reviews
4.7 out of 5 stars
5 Star   99 4 Star   24 3 Star   2 2 Star   0 1 Star   3
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Verified Purchaser
Fits well on bike and looks good.

Fits well on the bike and looks good, I had to use the stock hardware as the new ones would not allow the footpeg to lift up if the bike were to fall over. Other than that It holds the bike up well and I am happy.

Pro Moto Billet Kick-It Kick Stand
Aurora, CO
Worst purchase ever.

Ordered this for my 2005 Honda CRF450R and the kickstand is way to long. If I were to put the kickstand all the way down, the bike toppled over. The quality of the part is great but doesn’t help as it should. For $150 I would expect the measurements to be right.

Oregon, USA
Works great but too long

I had it on a 2005 crf250r it installed easy it looked great and it tucked up out of the way when it was up. The only complaint I have which can be a major one is it is too long when it's down. I parked my bike with it on flat concrete in my shop and it stood up almost Straight up. If you got it just right it would stand there and not fall over but if you barely bumped it it would tip over. The long stand can either be a blessing or a curse on the trails depending on if the ground bumps up or down where you stop. If it was just am inch or so shorter it would work allot better.

Verified Purchaser
Wapakoneta, OH 45895, USA
Exactly what I wanted

Installed on a 2013 kx250F .This stand is very well built, and looks good to. It tucks away behind my plastic really nice. No external springs is nice.

Verified Purchaser
YZ 250

Easy to install, looks awesome, works perfectly!

Verified Purchaser


Verified Purchaser

Obviously serious amount of engineering went into this stand. WAY better than any OEM stand I've ever seen.

Verified Purchaser
Long and tall

Its s great kickstand. Love every thing about it except its length. Too bad it wasn't made an inch shorter. It would be the perfect stand then. Guess I'll I'll have to live with it. Wish I had bought a steel one so I could shorten
It. After spending a hundred and fifty bucks on it I'm not going to pay someone to shorten it. Why so long? Maybe send money back to their customers so they can pay to have it remade. My rider sag is exactly
Where it should be. Manufacturer should know this. Send me 20 bucks to have it fixed to the length it should be

Verified Purchaser
Must have

Best item yet , purchased!!!

Verified Purchaser
Salisbury, MO 65281, USA
Easy Install & Works Great

Installed this on a 2003 Honda CR125R and works great. Installation takes 10 minutes with no modifications needed. Bike leans on the kick stand with just the right pitch.

Verified Purchaser
N. Nevada
Strong Stand

Very well built and engineered stand. Worth the extra $$.

Verified Purchaser
K stand

Love this stand fits perfectly ktm 125sx tucks up under side panel easy as pie to put on 10 minutes

Conflicted - 2016 KX250F

okay so i'm a little conflicted on this. First off it seems well made and the spring is really stiff so I don't see it coming down after hitting a jump or brush smacking it.

So now the poor parts of it.. it's almost too tall. the bike doesn't really lean over as much as I was hoping it would. I am contemplating cutting off about an 1" of the stand and re welding the plate back on. The way it currently is now, if you were to sit on it with the stand down it wants to dump you off to the other side. I was kinda hoping I would be able to kick my bike with this down but that wont be the case. Secondly, when I bring the stand back up to the set position it hits the number plate. so I have to manually hold the number plate out so it can go up without smacking into it.

Northwood ohio
Great stand

Love it

Verified Purchaser

The fit on my 13 rmz250 is perfect, lean angle is spot on. It tucks behind the number plate with no contact to any plastic. Buy it, you wont be sorry.

Verified Purchaser
Montana, USA
Works great

Very well built, and stays out of the way as advertised. Bought for my son's KX250f, bolts on easy. I read the reviews before purchasing, someone wished they supplied a longer bolt, mine came with one. Wasn't too tall as some have mentioned.

Verified Purchaser

Not too shabby! Fits the YZ450f very well, use some lock-tight.

Pro Moto Billet Kick-It Kick Stand
Verified Purchaser
Rock Solid Kickstand

This kickstand is great, internal spring, tucks in behind number plate when up, hasn't ever come down while riding. Only small issue is the bike sits fairly straight up and down on hard surfaces, luckily mine hasn't tipped over. In the dirt or sand it sinks down a little bit and sits as it should. Other than that, great figment, took about 20 minutes for install. Definitely worth the money!

Pro Moto Billet Kick-It Kick Stand
Pro Moto Billet Kick-It Kick Stand
Verified Purchaser
Anderson, SC, USA

Works great . Looks greast


The kickstand Construction is phenomenal. The only problem is it was manufactured too long which causes the bike to stand almost vertical. That part did not bother me because I have a manufacturing shop and we chopped it down and made it work for my bike. If you don't have those luxuries it's going to stand dangerously straight up.

See 20 More Reviews
23 Questions
Answered:   23
Not Yet:   0
Q: Will this fit my dual exhaust 2015 crf250r?
9 days 13 hours ago
Just ordered, realized that the exhaust may be an issue when the kickstand is folded.
Top 10 Contributor
8 days 13 hours ago
A: I'm not too sure if it will or not since your bike stock came with only one exhaust. It's going to depend on how your pipes comes out and sits on that side. Be sure to only mock it up and not install just in case it doesn't fit. We do offer returns on unused and uninstalled parts up to 90 days.
Q: Will this definatley fit a 2015 Husqvana FC 250 comoptition bike with polly carb subframe and no kickstand mounting?
13 days ago
Top 10 Contributor
13 days ago
A: Yes this will fit a stock framed 2015 FC250
Q: May sound like a silly question, but will the kickstand remain up if the bike is taken off jumps, and during hard landings?
2 months 12 days ago
Top 10 Contributor
2 months 10 days ago
A: Yes it will.
Q: Will this fit a 2009 KTM 250 SXF?
4 months 29 days ago
Top 250 Contributor Top 100 Contributor Top 25 Contributor Top 1000 Contributor Top 50 Contributor Top 10 Contributor
4 months 4 days ago
A: Correct we do carry a silver one that will work with the bike.
Top 25 Contributor Top 100 Contributor
4 months 4 days ago
A: Yes. That kickstand is an exact fit item. Prior to purchase, please enter your bike into the fitment. That will ensure that you receive the correct part.
Location: Southern California
Q: Does it interfere with installing after market footpegs? CRF450X?
Over 11 months ago
Does it interfere with installing after market footpegs? CRF450X Such as the pro moto billet footpegs that allow you to lower the pegs?
Top 100 Contributor
Over 10 months ago
A: it mounts far enough away from the footpegs running after markets is fine, especially the pro moto billet pegs, those guys do some great R&D on their products and how they work/mount with one another
Location: uk
Q: Will it fit a supermoto yz450f?
1 year 2 months ago
im just concerned that with the few inches lost in height it will be way too long and stand the bike too verticle.
1 year 2 months ago
A: I would think so, it fits right behind the foot peg of most bikes...
Location: Kansas, USA
Q: Will this kickstand hit my dual exhaust?
1 year 5 months ago
I have a 2006 crf250r with dual fmf exhaust, will this hit my left exhaust?
MotoSport Staff Expert
1 year 5 months ago
A: No it won't hit your exhaust. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct kickstand for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Location: Ogden, UT, USA
Q: Does this mount behind the footpeg mount or replace the footpeg mount?
1 year 8 months ago
I am wondering, because if it mounts behind the footpeg mount, then I assume it would push the left footpeg out 1/4" or so. Not sure if I like the idea of my footpegs not being the same on both sides.
Expert MotoSport Staff
1 year 8 months ago
A: Yes the kickstand mounts between the left foot peg bracket and the frame. I have not heard of anyone having any issues or even noticing a difference in the footage location after installing the Pro Moto Billet Kick-It Kick Stand. Installation instructions can be found at the link below.

1 year 4 months ago Location: Minnesota, USA
A: really?? I ride all over and I never have noticed the difference in any situation. My buddy even got one for his bike and he said KICK STAND ARE not cool!..until he saw mine! every time we where woods riding and stopped he had to find a tree to prop his bike on. it fell over once and ripped his seat, now the expensive devise is pretty darn cool with the cost of a new seat at hand!
Why didnt they make this from the factory??WHAT A NICE PIECE!
Q: Will this work for a crf 150r of is it to long?
1 year 8 months ago
MotoSport Staff Expert
1 year 8 months ago
A: Yes the Pro Moto Billet Kick-It Kick Stand will fit the Honda CRF150R. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct kick stand for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Q: Will this fit on a 2001 Honda CR250 ?
1 year 9 months ago
MotoSport Staff Expert
1 year 8 months ago
A: Yes. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct kick stand for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
1-10 of 23
See all bikes that this part fits...
See Fitments
# Part Numbers
Product Variant Manufacturer Part #
Black N/A
Silver N/A
Silver PMB-01-1007
Silver PMB-01-1008
Silver PMB-01-1012
Silver PMB-01-2008
Silver PMB-01-3001
Silver PMB-01-3002
Silver PMB-01-3003
Silver PMB-01-3004
Silver PMB-01-5001
Silver PMB-01-5003
Silver PMB-01-5004
Silver PMB-01-5005
Silver PMB-01-5006
Silver PMB-01-1003
Silver PMB-01-1001
Silver PMB-01-2009
Silver PMB-01-4005
Silver PMB-01-4002
Silver PMB-01-4001
Silver PMB-01-4008
Silver PMB-01-4006
Silver PMB-01-5002
Silver PMB-01-1005
Silver PMB-01-1014
Silver PMB-01-1004
Silver PMB-01-1006
Silver PMB-01-1009
Silver PMB-01-1010
Silver PMB-01-2001
Silver PMB-01-2002
Silver PMB-01-2005
Silver PMB-01-2007
Silver PMB-01-5007
Silver PMB-01-1011
Black PMB-01-3006
Black PMB-01-3005
Black PMB-01-3008
Report an Error