I do a lot of trail riding and I have children and a lot of times I have to stop quite a few times to get on and off the bike and it's nice to have a kickstand versus trying to find a tree every time you have to help somebody to help a kid get his four-wheeler unstuck or help them through rough Terrain.
- 9 reviews
- 5 reviews
- 4 reviews
- 1 reviews
- 0 reviews
Kickstand bolts right on. But the bike sits practically vertically when kick stand is activated. Unless the bike is leaning downhill it wants to tip over.
Bought mine 5 years ago. I have to stand on the pegs to start engine. Works fine on my YZ450F. I did have to bend the plate for more of a angle on the bike. No problem better than cutting it off and welding on it. Although I think you could. I also put some gussets on the back after a while to add some strength to it. Works great also for spinning it around on it.
It could be a little shorter, in the garage the bike stands up pretty straight but in the dirt the long length is nice to have
Does anyone know what this material is made of I'm trying to see if I can cut it down and re weld the bottom on I like it it's just to tall my 08 crf250r sits straight up when on the kick stand I'm afraid of it tipping over in the gerage.
I’m very happy with the kickstand. The only thing I had an issue about is that the bolt holes don’t line up so I have to drill new holes to get it to work.
This kickstand is way too long. The bike stands straight up so if you park the bike on a slight angle... bad things can happen. I’m gonna put a picture below of what happened in my driveway as a result of the kickstand being too long. Keep in mind that all my other bikes are fine and they have different kickstands.
I love to ride but i hate to work on my bike. The kick stand was easy to install once i figured out a way to get the old bolts out.
Well made. Seems strong. Directions were a little vague. Like other reviewer s noted is a bit long for the bike. Still works well bet could be shorter and would work better.
Installed easily on my RMZ 250. Had to turn it into a family model. The kickstand makes it easy to follow my son and help him out without having to lay my bike down all the time. It is the perfect length, especially for the softer sand here in NE North Carolina. I haven't noticed any imballance when jumping. Sturdy. Just a little expensive.
- Answered: 7
- Not Yet: 2
Question asked by Stan
Question:Q: Is the leg steel or aluminum?Question asked 6 days 13 hours ago
Question asked by JonC
Question:Q: Says this fits an 06 kx250f but not the 06 kx250. Is there a reason why? Is the bolt pattern different on the two bikesQuestion asked 1 year ago
Question answered by PaulUser's contributor status: Top 1Question answered 1 year agoAnswer: A: You are correct; the Moose Bolt-On Kick Stand fits the 2006 KX250F four-stroke.
To help us to find parts to fit correctly, we will need to know the year, make, and full model description of your motorcycle.
We carry the the Pro Moto Billet Kick-It Kick Stand to fit the 2006 KX250 two-stroke.
Question asked by elk wisher
Question:Q: Would this kickstand bolt on to a KX250f, 2013?Question asked 1 year 3 months ago
Question answered by Dan GearheadUser's contributor status: Top 25Question answered 1 year 3 months agoAnswer: A: Yes, this kickstand will bolt on to your 2013 KX250F, just make sure to have your bike profiled when ordering to insure correct fitment.
Question asked by Jones
Question:Q: Would this fit on a 2012 YZ450fQuestion asked 1 year 11 months ago
Question answered by robertUser's contributor status: Top 10 ContributorQuestion answered 1 year 11 months agoAnswer: A: Yes this will fit your bike.
Question asked by Craig
Question:Q: I have a lowering kit on my bike. will stand be to long?Question asked Over 3 years ago2007 Crf250r
Question asked by Everett
Question:Q: Where can i find a stand for my 2005 yz 85?Question asked Over 3 years ago
Question answered by MotoSportExpertUser's contributor status: Expert MotoSport StaffQuestion answered Over 3 years agoAnswer: A: If available through one of our suppliers, we would be happy to order it for you. Please call one of our sales professionals to inquire about special orders and availability.
Dirt Bike: 1-888-676-8853
Question asked by Mrtrippn
Question:Q: 2006 crf 450r turned super with 17" wheels. I will need to shorten the stand, is the base used for footing welded on or can I remove it cut reinstall?Question asked Over 3 years ago
Question answered by MotoSportExpertUser's contributor status: MotoSport Staff ExpertQuestion answered Over 3 years agoAnswer: A: It would likely need to be shortened. The base foot is welded on.
Question asked by SteveZ
Question:Q: Fit for 2006 yz250fQuestion asked Over 3 years agoI purchased this kickstand however my footpeg mount is fixed. There is only one bolt for the chain roller that meets up with this stand. Is there a hanger or another part required?
Question answered by MotoSportExpertUser's contributor status: MotoSport Staff ExpertQuestion answered Over 3 years agoAnswer: A: The 2006, aluminum frame, Yamaha YZ250F has brackets that bolt to the frame to attach the footpegs. These would need to be removed to install the Moose Bolt-On Kick Stand. The 2005, steel frame, YZ250F does not have removable brackets, in which case this Moose Bolt-On Kick Stand would not work. The link below shows the footage bracket. Also, feel free to give us a call at 888-676-8853.
Question asked by Carter
Question:Q: Does it spring back up after the weight is taken off the standQuestion asked Over 4 years ago
Question answered by MotoSportExpertUser's contributor status: MotoSport Staff ExpertQuestion answered Over 4 years agoAnswer: A: No. You would need to kick it back up.