Broke the stock kill switch off my 2016 Summit and decided to replace it with this switch. Local dealer recommended it and it was super easy to install. Looks good and will hopefully last longer than the stock one.
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Easy Installation, Maybe Five Minites and Voila! A Cool New Looking Billit Kill Switch.
Great product! Seems to work good. I have only two minor complaints.
Ones is every time you see a picture of these switches it has a black
button which looks cool on all of the anodized Aluminum colors, but this is not what you'll get!! The buttons all come RED which look a tad cheap in my opinion.
Second is the price which is more than twice that of the OEM switch which comes all black!!
I have had this switch on my 07' YZ250 for 6 years now and I have not had a single issue with it. Good solid build!
easy to install came with the wire connectors just stripped the rubber off my existing wires and crimped these ones together and works like a charm.. looks awesome. price was a little much
First off, the killswitch is definitely better than the stock on my 06 crf 250r. The stock would literally fall apart in my hand and was cumbersome to reassemble and try to mount at the same time while holding it together. This kill switch did clean up my bars but think fly could make this alot better by giving you a kill switch with the same connectors that the stock used. This would just allow you to unplug the stock and plug in the new. Instead, I had to use about 6 inches of wiring from the stock kill switch, in conjunction with the wiring provided on the fly killswitch, to give me enough length to mount the new killswitch in the same place as the stock one. I had to connect the wiring with 2 crimping connectors provided and used a heat gun to close up each end of the connectors. I wasnt comfortable leaving it like this, so i also used electrical tape to shield from the elements. I am saying all this as this could be alleviated if the proper connectors were already on the wires to keep all the wiring clean and less connectors means less that can go wrong. Just my two cents but it does work and not sure on durability as I only have one ride with it. Note in my photos that there is no white fly logo on the kill switch either.