EBC Dirt Racer Clutch Kits are a very dependable clutch for all aspects off Motocross and Offroad Racing. We use EBC Clutches in all our race bikes with great results at the starting line and throughout the race.
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Springs were too stiff. Clutch wouldn't disengage when clutch lever was pulled. Had to use old springs for the install.
Don't waste your money on other pad
They bite like no other.
I have only rode my Raptor 350 3 times since the installation, but I could not be more pleased with the performance. Installation was not too difficult.
Installed this on my cr250 has a ton of grab with the stiffer springs.
Bought this clutch kit for my YZ125 to save a few bucks. I change clutches often and have used OEM and another brand with no issues. Constantly having to adjust with this brand every few laps. These are not a real bargain, and I will never buy them again.
pretty straight forward install---do yourself a favor and have a nice impact gun--then its just put on what you took off---pre soak your pads before install
I race xc and it seems like I'm always adjusting the clutch now on my Trx. I have the same clutch in my kx and it does fine but for some reason the Trx doesn't like it
Item came very quickly and had no problems putting it on, lasted so far. Can't really given accurate account of the durability because I only have about 10 hours on the new clutch
Great clutch pack. Simple installation. Springs included are a little to stiff for my wife to pull, recommend reusing the stock springs.
Ordered this since they don't make an oem kit for my bike, figured I'd try this since its cheaper than buying all the plates and springs separately. Installed it, seemed ok, but a handful of rides later, it was already shot. Couldn't do a decent start to save my life. Finally broke down an bought the oem parts and haven't had a problem since.
I have used clutches from EBC many times but this is the first time I had a sizing issue on customers '07 KX250. The actual stack height was off by 1.75mm so I was using up all the adjustments and still not getting full release.Have had several conversations with EBC and after exhausting every posibility, that stack was the problem. They have issued a replacement and all is good.
it was i expect or more
product came with completely wrong springs out of 6 three different sizes. EBC sent me correct ones within 3 days ..
I am a so called "motodad" and this clutch kit comes with the springs, steels, and fiber plates. We run it in my son's 2014 Kawasaki KX85. These kids racing the 2-strokers are hard on the clutches and this product works well for the money, especially when you change the oil after each ride day or race day. Great product for the money.
Lasted 1 ride on a mx track. Installed on Yamaha YZ 250, soaked the fiber plates overnight before installing in a brand new Hinson clutch basket. I lost the clutch after about 4 hours total on the 1st day after installation. Worse yet, is that these plates scored my brand new clutch basket. I promptly replaced with OEM Yamaha clutch plates and have not had a single problem in 1.5 seasons of hard riding. Don't be tempted to save money here. In the end it cost me much me much more $$$
Great clutch , easy to install great hook up and last
all the performance you would expect from EBC i run them in all my bikes after the stock products wareout .
works as good as ones at 2x the price
works and fit like it should stiffer spring also were sweet not too stiff