A must for any shop or any 4 stroke racer!
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Hot cams shim kit worked perfectly. Adjusting valve clearances improved the feeling from the motor .
A great assortment of shims in a convenient carrying case.
Great kit to have to get the job done quick!
Shims fit well (diameter). Shim thickness posted on the shims matched my caliper readings. The shims I needed were pretty close to the middle of range of shim sizes in the kit.
If you do your own repairs this is a must have
These work as they should but be sure to check them. They are not exactly the size they say. If it says 1.65 it may only be a 1.61. I wish the kit came in smaller increments but I guess that would probably cost more. Good product for the price.
Missing a few, otherwise shims were accurate cut when measured with my caliper and micros.
If you work on your own machines this kit is a must, has all sizes and multiple shims for each size. and comes with a site glass to read the sizes on the shims. Great Product!
They organize them all for you, telling you the size which is amazing. I went ahead a measured them all with my micrometer and they were all correct. This kit made adjusting my valves super easy!!
I only needed one form the kit but it was comforting know that if I needed more I had them. Thanks
Product just as explained good case for storage. I will be buying the other set for my 450s.
Stop trying to adjust that hanging idle or bog and get a shim kit so you know your valves are right before you tweak the carb.
Number one issue I see with most dirtbikes are tight valves and messed up carb adjustments.
It had what I needed and a lot more.
Great shims! gets the job done, well made container and shims, plenty to choose from to do your bike many times and even help a bud so his.
Did my first valve adjustment and having a complete kit like this is a must. Great product and should be able to shim lots of bikes down the road.
A wide variety of shims makes the job a breeze. no more taking it to a shop you can buy two shim kits for the cost of one valve adjustment.
Every thing I needed was there you will wind up with a lot of extras. It's berly enough of each size to do a 4 cyl 16 valve engine. You could possibly run out of a size but I just dropped to the next smallest. Had rather valve be a tad loose than tight.
Valve shims are old hat. Where Hot Cams sets theirs apart is in the presentation and extra goodies you get for the money. The shims come in a divided, labeled, seal-padded plastic tray, with clearly-marked pockets. Not only are they well-organized, but the box contains a jeweler's loupe as well, to make it easier to read the markings on the shims! Very handy.
Usually sizes from 2.30 mm - 1.60 mm if memory serves correct.